To ensure greater precision and fluidity it is recommended to put a foam ring under the knob (see photo above) and dielectric lubricant in the joystick!
follow me for other news :P https://www.instagram.com/faq_t0tum/
The ORBION project is OpenSource so if you have the pleasure of supporting my next works I will be grateful fot the coffee.
PayPal: https://www.paypal.me/MattiaRusso308?locale.x=it_IT
Componets:
- M3x20 (7pcs)
- Nuts M3 (3pcs)
- Oled 1.3" I2C: https://s.click.aliexpress.com/e/_AtYDV6
- Encoder (KY-040): https://s.click.aliexpress.com/e/_AmjV9a
- Joystick (KY-023): https://it.aliexpress.com/item/1005002116584640.html?spm=a2g0o.productlist.0.0.2e2b50c7nvFgde&algo_pvid=6dde9e9f-ddc6-48b0-82c2-fe9a0bd0ef56&algo_exp_id=6dde9e9f-ddc6-48b0-82c2-fe9a0bd0ef56-0&pdp_ext_f=%7B%22sku_id%22%3A%2212000018795085331%22%7D&pdp_pi=-1%3B3.78%3B-1%3B-1%40salePrice%3BEUR%3Bsearch-mainSearch (important: the joystick shaft must be 4mm)
- Arduino Pro Micro: https://s.click.aliexpress.com/e/_AYt9zi
- Push Button 8mm: https://s.click.aliexpress.com/e/_ADGxZS
- Foam