paulskirk53
I run an astronomical observatory. Climate change means its cloudy for most nights though. All the code here is used to run the observatory automation.
SelectSwansea
Pinned Repositories
4809-Encoder
The azimuth encoder coded for the AVR4809
a-test-one
just a test
Arduino-Canon-Lens
The Arduino code for the canon lens focuser project
Arduino-Master-Radio
This is the arduino sketch linked to the Dome driver. It Transmits to the Arduino Encoder board to get the Dome Azimuth related data, and to the Arduino Shutter board for shutter related operations.
arduino-shutter
The arduino sketch which controls the observatory shutter movements
Azimuth_Encoder
The arduino sketch which provides the interface between the dome driver and the hardware angle encoder.
CanonLensFocuser
The ASCOM Focuser Driver development
Circular-Linked-List
Control-Box
This is the development of control Box - a one AVR4809 solution for dome control.
Dome
Dome files
paulskirk53's Repositories
paulskirk53/4809-Encoder
The azimuth encoder coded for the AVR4809
paulskirk53/a-test-one
just a test
paulskirk53/Arduino-Canon-Lens
The Arduino code for the canon lens focuser project
paulskirk53/Arduino-Master-Radio
This is the arduino sketch linked to the Dome driver. It Transmits to the Arduino Encoder board to get the Dome Azimuth related data, and to the Arduino Shutter board for shutter related operations.
paulskirk53/arduino-shutter
The arduino sketch which controls the observatory shutter movements
paulskirk53/Azimuth_Encoder
The arduino sketch which provides the interface between the dome driver and the hardware angle encoder.
paulskirk53/CanonLensFocuser
The ASCOM Focuser Driver development
paulskirk53/Circular-Linked-List
paulskirk53/Command_Processor
The Arduino Command Processor
paulskirk53/Control-Box
This is the development of control Box - a one AVR4809 solution for dome control.
paulskirk53/Dome
Dome files
paulskirk53/Stepper
The Arduino Stepper motor driver
paulskirk53/Dome_Control
My interface for Gower Observatory dome control
paulskirk53/Linked-List
The code used for azimuth facilitaion inthe Stepper project
paulskirk53/Monitor-Program
Monitors the Azimuth Encoder and Stepper MCUs
paulskirk53/Monitoring-Observatory-MCUs
monitoring program
paulskirk53/Quartz
This is used to pubish the Observatory wiki, created using Obsidian
paulskirk53/SPI-Master-mega2560
The master of a pair (SPI master and slave)
paulskirk53/SPI-Slave-mega2560
The SPI slave of a pair (SPI master and slave)
paulskirk53/Visual-Compass
A dynamic graphical compass for Azimuth