An OATH (Open Authentication) Toolkit
A Java-based OATH toolkit providing components for building one-time password authentication systems. Supported technologies include the event/counter-based HOTP algorithm (RFC4226) and the time-based TOTP algorithm (RFC6238).
Presently, the toolkit provides the following components:
- oath-otp: A module for generating and validating OTPs.
- oath-otp-keyprovisioning: A module for providing OTP key provisioning support.
Example of Generating an HOTP
// Generate a 6-digit HOTP using an arbitrary moving factor of 5,
// and a recommended 160-bit (20 bytes) length key.
String sharedSecretKey = "12345678901234567890";
byte[] key = sharedSecretKey.getBytes("US-ASCII");
HOTP hotp = HOTP.key(key).digits(6).movingFactor(5).build();
// prints "254676"
System.out.println(hotp.value());
Example of Validating an HOTP
// Example of validate a client submitted HOTP.
// Assume the current moving factor of the given client's HOTP is 5, and HOTP's are 6-digits.
String clientHOTPValue = "..."; // The client's HOTP value as received by the authentication server.
byte[] key = ...; // The client's shared secret key.
long currentMovingFactor = 5; // The client's current moving factor as determined by the authentication server.
// Configure a validator to look-ahead an additional 2 times.
HOTPValidationResult result = HOTPValidator.lookAheadWindow(2).validate(key, currentMovingFactor, 6, clientHOTPValue);
if (result.isValid()) {
// Validation has succeeded, so the authentication server would need to update the client's current moving factor
// mapping so that subsequent validation requests reference this new/updated value. the new/updated value is
// captured in the returned HOTPValidationResult via the getNewMovingFactor() method.
updateMovingFactorForClient(...., result.getNewMovingFactor());
return;
}
// Validation failed, so the authentication server should ask for another authentication pass of the HOTP validation
// protocol, until the maximum number of authorized attempts (throttling parameter) is reached. Once the maximum number
// of authorized attempts has been reached, the authentication server should lock out the client's account, and initiate
// a procedure to inform the user.
throw new Exception("HOTP validation attempt failed");
Example of Generating a TOTP
// Generate an 8-digit TOTP using a 30 second time step, HMAC-SHA-512,
// and a 64 byte shared secret key.
String sharedSecretKey = "1234567890123456789012345678901234567890123456789012345678901234";
byte[] key = sharedSecretKey.getBytes("US-ASCII");
TOTP totp = TOTP.key(key).timeStep(TimeUnit.SECONDS.toMillis(30)).digits(8).hmacSha512().build();
System.out.println("TOTP = " + totp.value());
Example of Validating a TOTP
// The following example illustrates support for Google Authenticator.
// Google Authenticator supports 6-digit TOTPs, and base32 string shared
// secret keys.
//
// Step 1: Generate a 160-bit shared secret key.
byte[] bytes = new byte[20];
SecureRandom random = new SecureRandom();
random.nextBytes(bytes);
String secretKey = BaseEncoding.base32().encode(bytes);
// Step 2: Provision the shared secret key.
// a) Encrypt the 'secretKey' and store it in a secured location.
// b) Deliver the 'secretKey' to the client in a secured fashion (e.g. QR code over SSL)
// Step 3: The client registers the 'secretKey' in their Google Authenticator app. The app
// should now be generating TOTPs every 30 seconds.
// Step 4: The client initiates a two-factor authentication session (i.e. online banking login).
// a) The client provides their username and password (knowledge factor)
// b) The client provides the TOTP code displayed from their Google Authenticator app.
// (typically b) would be performed as second step after a) has succeeded)
// c) The user submits the request to the server.
// Step 5: The server authenticates the user.
// (assume the username and password were authenticated)
String clientTOTP = "..." // the TOTP value the client submitted.
String encryptedSecretKey = "..." // retrieved from some secured data store.
String secretKey32 = decrypt(encryptedSecretKey); // assume decrypt(...) is implemented
byte[] key = BaseEncoding.base32().decode(secretKey32);
TOTP totp = TOTP.key(key).timeStep(TimeUnit.SECONDS.toMillis(30)).digits(6).hmacSha1().build();
if (totp.value().equals(clientTOTP)) {
// passed authentication...
} else {
// failed authentication...
}
// Alternatively, to validate the client TOTP, you can use the TOTPValidator class:
boolean valid = TOTPValidator.window(1).isValid(key, TimeUnit.SECONDS.toMillis(30), 6,
HmacShaAlgorithm.HMAC_SHA_1, clientTOTP);
Example of Generating a QR Code Image
String secretKey = "GEZDGNBVGY3TQOJQGEZDGNBVGY3TQOJQ"; // base32 encoded key.
OTPKey key = new OTPKey(secretKey, OTPType.TOTP);
String issuer = "Acme Corporation";
String label = issuer + ":Alice Smith";
// Create the OTP Auth URI.
OTPAuthURI uri = OTPAuthURIBuilder.fromKey(key).label(label).issuer(issuer)
.digits(6).timeStep(30000L).build();
System.out.println(uri.toUriString());
System.out.println(uri.toPlainTextUriString());
// Render a QR Code into a file.
File file = new File("path/to/qrcode.png");
QRCodeWriter.fromURI(uri).width(300).height(300).errorCorrectionLevel(ErrorCorrectionLevel.H)
.margin(4).imageFormatName("PNG").write(file.toPath());
otpauth://totp/Acme%20Corporation:Alice%20Smith?secret=GEZDGNBVGY3TQOJQGEZDGNBVGY3TQOJQ&issuer=Acme%20Corporation&digits=6&period=30
Building
You will need a Java Development Kit (1.7) and Maven.
To build:
mvn clean verify
Likewise, if you would want to generate code coverage reports, execute the following commands:
mvn clean verify -DskipTests
mvn cobertura:cobertura
The code coverage reports will be available under target/site/cobertura directory (open the index.html file).
License
The MIT License (MIT)