GCE Ecodevices RT2 component for Home Assistant

This is a custom component for Home Assistant for GCE Ecodevices RT2. This work is based on the work of Aohzan ipx800. It uses python package pyecodevices_rt2 to call the GCE Ecodevices RT2 API.

GCE Ecodevices RT2, this repository is for you.
GCE Ecodevices, see the great work of Aohzan ecodevices.
GCE EcodeviceIPX800 V4, see the great work of Aohzan ipx800.

Documentation

See https://pcourbin.github.io/ecodevices_rt2

Full Example

ecodevices_rt2:
 - name: EcoRT2
   host: "192.168.0.20"
   port: 80 # Optional, default: 80
   api_key: #!secret rt2_api_key
   update_after_switch: 0.1   # Optional, default: 0 (seconds)
   scan_interval: 5
   devices:

     #### API Example
     - name: Elec Index HC (from API)
       type: "api"
       component: "sensor"
       api_get: "Index"
       api_get_value: "All"
       api_get_entry: "Index_TI1"
       device_class: "energy"
       unit_of_measurement: "kWh"
       state_class: "total_increasing"
       icon: "mdi:flash"
     - name: EnOcean Switch 1 (from API)
       type: "api"
       component: "switch"
       api_get: "Get"
       api_get_value: "XENO"
       api_get_entry: "ENO ACTIONNEUR1"
       api_on_get: "SetEnoPC"
       api_on_get_value: "1"
       api_off_get: "ClearEnoPC"
       api_off_get_value: "1"

     #### Counter Example
     - name: Counter 1
       type: "counter"
       id: 1

     #### DigitalInput Example
     - name: DigitalInput 1
       type: "digitalinput"
       id: 1

     #### EnOcean Switch or Sensor Example
     - name: Bedroom temperature
       type: "enocean"           # Using default component `sensor`
       id: 1
       unit_of_measurement: "°C"
       device_class: "temperature"
       icon: mdi:thermometer
     - name: EnOcean Switch 1
       type: "enocean"
       component: "switch"
       id: 1
     - name: EnOcean Switch 2 as Light
       type: "enocean"
       component: "light"
       id: 2

     #### Post and Sub-Post Example
     - name: Post 1
       type: "post"
       id: 1
     - name: Subpost 2 of Post 1
       type: "post"
       id: 1
       subpost: 2

     #### Relay Example
     - name: Relay 1
       type: "relay"             # Using default component `sensor`
       id: 1
     - name: Relay 2 as Light
       type: "relay"
       component: "light"
       id: 2

     #### SupplierIndex Example
     - name: Supplier Index 1 (EDF Info)
       type: "supplierindex"
       id: 1

     #### Toroid Example
     - name: Toroid 1  # 4 sensors: 2 Consumption + 2 Production
       type: "toroid"
       id: 1
     - name: Toroid 5  # 2 sensors
       type: "toroid"
       id: 5

     #### VirtualOutput Example
     - name: Virtual Output 1
       type: "virtualoutput"      # Using default component `sensor`
       id: 1
     - name: Virtual Output 2 as Light
       type: "virtualoutput"
       component: "light"
       id: 2

     #### X4FP (Heaters) Example
     - name: Heater Module 1 Zone 1
       type: "x4fp"
       component: "climate"       # Can be omitted since default value
       module: 1
       zone: 1
     - name: Heater Module 1 Zone 2 as Switch
       type: "x4fp"
       component: "switch"
       module: 1
       zone: 2

     #### XTHL Example
     - name: XHTL 1
       type: "xthl"
       id: 1

Credits

This work is inspired by the work of Aohzan ipx800.

This repo structure was inspired by oncleben31/cookiecutter-homeassistant-custom-component project template created with Cookiecutter.

pcourbin/ecodevices_rt2

GCE Ecodevices RT2 component for Home Assistant

Documentation

Full Example

Credits