BIN(hex) files for ESP32 and upload tool V3.0-V3.4
hamroel opened this issue · 2 comments
If somebody is able to compile an INO-file with its libraries the whole compiling-history is stored in a local temp-directory
C:\Users\nn\AppData\Local\Temp\arduino_build_400xxx
There appear also the bin files for ESP32 and when copied before IDE is closed you can use them for ESPtool.exe
For SI4735_2.8_TFT_V3.4 it will be like this:
26-03-2021 12:26 17.120 bootloader_dio_80m.bin
26-03-2021 12:26 8.192 boot_app0.bin
12-04-2021 22:22 3.519.420 esptool.exe
27-02-2022 11:38 560 flash.bat
27-02-2022 10:57 407.520 SI4735_2.8_TFT_V3.4.ino.bin
27-02-2022 10:57 3.072 SI4735_2.8_TFT_V3.4.ino.partitions.bin
If running the flash.bat (modified for SI4735_2.8_TFT_V3.4) it skips the whole compiling process and pumps it into the ESP32 WROOM
content of flash.bat:
@echo off
echo -----------------------------
echo - Update tool ESP32 SI4735 -
echo - Version V3.4 -
echo -----------------------------
echo.
echo Available COM-ports:
chgport
echo.
set /p COM=Enter Comport number (example: 3):
esptool.exe --chip esp32 --port COM%COM% --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 80m --flash_size detect 0xe000 boot_app0.bin 0x1000 bootloader_dio_80m.bin 0x10000 SI4735_2.8_TFT_V3.4.ino.bin 0x8000 SI4735_2.8_TFT_V3.4.ino.partitions.bin
@Pause
regards Roel
With the zip file you can not make your own selections in the different options.