pe0mgb/SI4735-Radio-ESP32-Touchscreen-Arduino

Issues

• GERBER PCB

  #22 opened 2 years ago by pashkaboss
  3

• Using 2.4" TFT touch with ILI9341 - SETUP calibration of horizontal position

  #28 opened 2 months ago by z34pec
  0

• ledcSetup error ?

  #27 opened 4 months ago by z34pec
  2

• 2.8" TFT SPI 240*320

  #6 opened 4 years ago by Haranochi
  14

• Compilation error: 'But_Key_Width' was not declared in this scope

  #26 opened a year ago by JKorvo
  3

• SI5351 not found

  #25 opened a year ago by dpechman
  2

• Compilation error: 'class TFT_eSPI' has no member named 'setTouch'

  #24 opened 2 years ago by andreasmon
  8

• TFT rotate

  #23 opened 2 years ago by FabioLucca01
  10

• Compile Error

  #21 opened 3 years ago by ESSCHENK1
  2

• ...

  #19 opened 3 years ago by RX1900
  1

• Compilation errors

  #20 opened 3 years ago by Gods69
  2

• Rotary Encoder Reversed in 3.5

  #18 opened 3 years ago by smannchen
  2

• BIN(hex) files for ESP32 and upload tool V3.0-V3.4

  #16 opened 3 years ago by hamroel
  2

• Gerd Baak

  #17 opened 3 years ago by Kuddl5
  0

• compiling V3.0-3.4 with IDE1.8.15 not succesfull

  #15 opened 3 years ago by hamroel
  3

• AGC enables in SSB after tuning so far

  #14 opened 3 years ago by madmax2069
  5

• BFO issue when changing bandwidth

  #13 opened 3 years ago by madmax2069
  0

• MW/AM 1KHz-2KHz off frequency with 10KHz steps

  #12 opened 3 years ago by madmax2069
  0

• display does not dim or turn off after 5min

  #11 opened 3 years ago by larrykabo
  5

• changes for clock schematic is not on github

  #9 opened 3 years ago by larrykabo
  2

• display brightness

  #10 opened 3 years ago by larrykabo
  1

• Volume and noise

  #8 opened 4 years ago by codeput
  1

• Touch calibration

  #7 opened 4 years ago by codeput
  8

• HEX for ESP32 upload

  #4 opened 4 years ago by Dfinitski
  6

• Compilation error

  #5 opened 4 years ago by Dfinitski
  2

• When I compile the sketch I receive error

  #2 opened 5 years ago by TA2WK
  3

• error

  #1 opened 5 years ago by platone58
  3