peng-zhihui/Peak

Issues

• 小白一枚，遇到不太清楚的问题。

  #33 opened 5 months ago by zhangzeming1
  0

• 导入工程后编译 显示FreeRTOS库里面 config文件报错 找不到avr/io.h 文件

  #26 opened 2 years ago by idnewfeel
  1

• 有没有遇到过这个问题朋友，[ 1316][E][esp32-hal-ledc.c:75] ledcSetup(): ledc setup failed!

  #30 opened 2 years ago by compilerM
  8

• 请教一下，稚晖君你的开发环境是什么？

  #15 opened a year ago by FlyyingPiggy2020
  1

• 页面切换到3D 正方形后回不了SystemInfos页面

  #19 opened 3 years ago by bt5-coder
  2

• 關於購買

  #32 opened 2 years ago by andyjon
  0

• Peak硬件电路设计问题

  #4 opened 3 years ago by captain-zhang
  14

• 无法找到 FreeRTOS.h，DSTATUS、DWORD 等变量名未定义，sd_diskio.cpp 中某些函数未定义等问题的解决方法。

  #28 opened 2 years ago by MXuanZero
  2

• 下载的工程编译后报错，提示没有freertos文件 还有fat文件系统也有错误。

  #24 opened 3 years ago by givemethree
  7

• Some reports of suspected vulnerabilities

  #27 opened 2 years ago by firmianay
  1

• 采用httpCilent获取天气状况的问题

  #23 opened 3 years ago by pockrt-m
  0

• 外部按键事件触发怎么传递到UI的？

  #22 opened 3 years ago by choujayyl
  0

• 你好，能麻烦提供一下bom吗？

  #21 opened 3 years ago by tony2ty
  0

• 请问有朋友遇到无法下载程序的情况吗？硬件焊接检查很多遍了，应该没有问题。

  #20 opened 3 years ago by marsdace
  1

• 有没有遇到过蜂鸣器不响的朋友，我试了加方波会响，但是源程序下进去开机并没有音乐？请教一下各位

  #18 opened 3 years ago by txp666
  2

• 关于CON1 引脚引出问题

  #16 opened 3 years ago by HanfG
  2

• 软件要怎么烧录

  #17 opened 3 years ago by SuperWangRong
  1

• 硬件PCB和软件的IMU不匹配

  #14 opened 3 years ago by piaoxuebingfeng
  0

• 关于焊接问题

  #8 opened 3 years ago by liuyi585851
  2

• 关于供电切换电路问题

  #10 opened 3 years ago by yuzhou3996
  5

• 电池的型号能发一下吗

  #12 opened 3 years ago by SuperWangRong
  1

• 稚晖君Resources文件夹中的Font和Image是放到内存卡中的吗？我看到有张图的大小已经一千多k了

  #13 opened 3 years ago by AaronChuzb
  1

• 关于FLASH引脚的问题

  #11 opened 3 years ago by zengxuetao
  0

• 关于显示屏元器件选型

  #7 opened 3 years ago by zhiwenwu
  6

• 关于imu选型的问题

  #9 opened 3 years ago by AaronChuzb
  2

• 软件部分的Simulator缺少文件报错

  #5 opened 3 years ago by li5123058
  7

• 关于元器件推荐咨询以及3D模型

  #1 opened 3 years ago by zhiwenwu
  8

• 关于线程同步

  #6 opened 3 years ago by zye1996
  1

• README中图片不显示

  #3 opened 3 years ago by JokerQyou
  1

• 适配外壳，板子打多厚合适

  #2 opened 3 years ago by mlpzaq9998
  1