peng-zhihui/PocketLCD

Issues

• 这个能去掉充电宝做超薄吗

  #63 opened 6 months ago by wwilll
  1

• 想知道大佬怎么把AD的pcb文件导入到fusion360的

  #17 opened 4 years ago by jieren30
  2

• 新人试水卡裆了···

  #41 opened 4 years ago by hzc1111
  5

• 刷了固件，但没有显示，背光和电源都正常，屏是链接购买的型号

  #45 opened 4 years ago by jeff-ning
  3

• E-ink display

  #60 opened 2 years ago by Coperbytes
  0

• 想做成相机的监视屏幕 不知道有没有同样想法的朋友。

  #43 opened 4 years ago by TianmoTTT
  1

• 期待出一个 typec 视频输入版本的 lcd

  #55 opened 3 years ago by zoudeze
  2

• after burn firmware, my lcd has connect to the PC but nothing in screen, it go to white slowly. What things i do wrong ??? pls Helps me

  #62 opened 2 years ago by quannhe18
  0

• 烦请稚晖君推荐个10.1-15.6寸的屏幕

  #20 opened 2 years ago by fzwwj95
  2

• 大神，LCD的型号是那个，链接上屏的好像不对，屏的丝印跟演示的不一样

  #46 opened 4 years ago by jeff-ning
  2

• 树莓派3B直接先插HDMI再开机会花屏 用另外一个"派"开机不显示,要HDMI查一下正常显示器再插回PocketLCD才能显示

  #32 opened 4 years ago by colinkyd
  7

• 烦稚晖君能否给编个1920x480记录仪屏幕固件,主控lt6911c主控

  #61 opened 2 years ago by yaoyonghe
  0

• 热敏电阻阻值

  #59 opened 2 years ago by FrankWillionShi
  0

• 小白提个问题，请问固件需要怎么烧写

  #58 opened 3 years ago by zsrx
  1

• 咸鱼二手Lumia 1520 整机200 有没有有兴趣的一起搞一下驱动

  #57 opened 3 years ago by TarryHoo
  0

• 淘宝有人出售你这个项目的成品

  #54 opened 3 years ago by mrxiaodong-5
  1

• Buy IPS screen

  #56 opened 3 years ago by dorcu
  0

• 亚克力中框

  #28 opened 4 years ago by ufo250120
  3

• 请问一下各位大佬

  #35 opened 4 years ago by skq7929
  1

• 如果可以无线投屏是不是应用场景更丰富？

  #44 opened 4 years ago by digitalboy
  3

• powerbank电池焊上后，VBUS_A1和VBUS_A2应该是5V吗？

  #53 opened 3 years ago by LimboFly
  2

• 捷配打板子错误

  #52 opened 3 years ago by weicheng-09
  0

• [Help me] Way for screen orientation change from portrait to landscape.

  #51 opened 3 years ago by szasurada
  0

• 求助！！！Power_Bank的pcb版文件我直接发去打样，被告知多处线距，线距铜皮间距不足4mil。

  #50 opened 3 years ago by 944390394
  0

• 所以君哥能不能讲下怎么编译驱动呢？

  #49 opened 3 years ago by SparkCD
  1

• 个人制作成本高昂，为方便大家制作，降低大家成本，让每个热爱DIY的人不再为材料发愁，现在我们已开启散件拼团，有元器件包，有PCB板

  #25 opened 4 years ago by Professor-Chen
  1

• 某宝店铺：极客出版社正在众筹中，预计月中以后锁死车门。

  #29 opened 4 years ago by pengzi007
  1

• 求救

  #48 opened 3 years ago by tor910130
  0

• 求此屏幕在jetson nano上的设置方法

  #47 opened 4 years ago by liumarcus70s
  2

• 关于高亮屏 LED背光电路是否支持42V屏幕

  #38 opened 4 years ago by CmST0us
  2

• 下载总遇到失败

  #42 opened 4 years ago by mailonghua
  0

• 稚晖君，驱动固件能不能修改下，让启动的时候是横屏？

  #34 opened 4 years ago by bushiniu
  2

• 一直烧录失败 咋整。。。

  #39 opened 4 years ago by oumaiguo
  2

• 东芝方案调出来了，不过还是这个屏，感兴趣的可以来看看

  #40 opened 4 years ago by ylj2000
  0

• 火钳刘明

  #37 opened 4 years ago by LikeSingJumpRapBasketball
  0

• PocketLCD

  #36 opened 4 years ago by kenpeter056
  0

• 为大家提供一个全包裹亚克力外壳, 试验了5种加工方案, 以最低成本量产, 最终成型, 欢迎大家来上车

  #33 opened 4 years ago by geeke2008
  0

• 请问固件里有没有编译audio部分

  #19 opened 4 years ago by Mar1n3
  0

• 求助 做好之后 出现问题

  #31 opened 4 years ago by gyy0814
  4

• 可不可以上传一下亚克力上下盖的模型

  #23 opened 4 years ago by MengxingFusheng
  6

• 大电感的钻孔问题

  #26 opened 4 years ago by nanshenwei
  0

• 大家是怎么固定屏幕与电池的

  #30 opened 4 years ago by Mar1n3
  1

• 好奇为什么不采用东芝的TC358870XBG方案

  #27 opened 4 years ago by fzwwj95
  3

• 请问pcb走线有时故意画弯弯曲曲是是为什么？

  #16 opened 4 years ago by feng-lei
  4

• 个人制作成本高昂，为方便大家制作，降低大家成本，让每个热爱DIY的人不再为材料发愁，现在我们已开启散件拼团，有元器件包，有PCB板

  #24 opened 4 years ago by Professor-Chen
  1

• 大家一起拼pocket-lcd 二群qq群916619857,第一车100已经发车，第二车正在筹备一月底前可发货

  #22 opened 4 years ago by Professor-Chen
  0

• 关于PCB HDMI_To_MIPI，为什么不直接在PCB上走线连接，而是使用排线连接？

  #21 opened 4 years ago by Jnickcai
  1

• 原理图Main中，三芯端子P1的作用是什么，需要焊接吗？焊接后怎样对外连接？

  #18 opened 4 years ago by xie1009348869
  1

• 大佬考虑出个1440p屏的固件儿么~~

  #14 opened 4 years ago by zeg
  1

• 请问不同屏幕有没有办法进行校色？

  #15 opened 4 years ago by Lasx
  0