============================ VCU Control Software Source Code ============================ Overview ======== The control-software can be used as: - a standalone command-line executable (see below). - a library, whose entry point can be found in lib_encode and lib_decode How to build the encoder and the decoder ===================================== GCC: ---- You need a working gcc/g++ toolchain installed. Just run: $ make The resulting binaries will be available in the bin/ directory You can test it on a very simple configuration with the following command: $ ./bin/ctrlsw_encoder -cfg test/config/encode.simple.cfg Libraries ========= customers Allows to change build options like traces enabling (config.h) lib_app misc C++ utilities. lib_cfg C++ configuration file parsing. lib_conv_yuv C++ yuvs conversion helpers for the encoder (use lib_app) lib_preprocess QP table management lib_rtos wrapper around OS synchronization primitives. lib_common misc C utilities. lib_common_* structures used to communicate with the firmware lib_bitstream high-level syntax bitstream generation (e.g headers). lib_encode encode library entry point. lib_decode decode library entry point lib_parsing codec specifications specifics for the decoder (HLS, DPB, etc.) lib_fpga communication with the hardware (read/write register, irq). lib_ip_ctrl interface to the codec. User Manual =========== Refer to Xilinx product guide document: PG252 H.264/H.265 Video Codec Unit Product Guide