peplin/pygatt

Issues

• pygatt.backends.bgapi.exceptions.BGAPIError: Unable to auto-detect BLED112 serial port

  #350 opened 6 months ago by zhubenjamin
  2

• pygatt does not connect to Raspberry Pi 4 BLE peripherals

  #349 opened 6 months ago by ojazdowski
  0

• Decoding packet with more than one field of same data type will result in capturing only the last one

  #348 opened 9 months ago by vanniroldiem
  0

• pygatt needs all the time three attempts to open serial port with BLED112

  #347 opened 9 months ago by buhln
  0

• Only able to scan a limited amount of times.

  #346 opened a year ago by cheese2135
  0

• Problem installing pygatt via pip

  #345 opened a year ago by kassprzak
  0

• Fully Implement Long Characteristic Read/Write

  #341 opened 3 years ago by olpossum
  1

• char_write_handle slow and causes BLEError

  #344 opened 2 years ago by TForest-UwU
  0

• Does PyGatt support the Android platform backend

  #343 opened 2 years ago by ujur007
  0

• How to subscribe to characteristic of multiple slaves at the same time?

  #333 opened 3 years ago by sd1026
  1

• KeyError: 42

  #340 opened 3 years ago by sdw99
  1

• gatttool gets stuck using 100% cpu when pygatt is used from cron

  #319 opened 4 years ago by af7567
  1

• Unable to read the characteristic but with no problem to subscribe

  #338 opened 3 years ago by YuanjenHung
  0

• What is the equivalent to my usual bash commands

  #321 opened 4 years ago by dorealex
  3

• Low data rate

  #334 opened 3 years ago by billskar23
  0

• Replicating bleak code with pygatt: Failure to subscribe

  #332 opened 3 years ago by sunshineinsandiego
  0

• Consider asyncio bleak backend as gatttool replacement

  #304 opened 4 years ago by xloem
  6

• Support PIN authentication

  #303 opened 4 years ago by Cheprod
  2

• 'BGAPIBackend' object is not callable

  #331 opened 4 years ago by arabo5
  1

• Trying to subscribe...

  #327 opened 4 years ago by aldocarrolo
  2

• Embedded Linux board errors out like this

  #328 opened 4 years ago by maneesh-phy
  1

• how to listen to indication?

  #326 opened 4 years ago by pauledd
  2

• Using threads to connect to mutliple devices at the same time.

  #325 opened 4 years ago by mat-moten
  0

• Add callback or method for user to detect device disconnections

  #306 opened 4 years ago by eraguzin
  2

• Any way to get signal strength?

  #302 opened 4 years ago by JJack27
  4

• Failed to connect to BLED112 adapter with BGAPIBackend

  #324 opened 4 years ago by haroldgohjc
  0

• Documentation missing

  #322 opened 4 years ago by meir444
  1

• Subscribing to single notification characteristic and cannot unsubscribe

  #318 opened 4 years ago by imranmoezkhan
  0

• missing notification when subscribed --or-- not all data received from notificaitons

  #297 opened 4 years ago by snyderra
  1

• Read sensor data from BLE temperature sensor

  #284 opened 4 years ago by jaaanix
  1

• BGAPIBackend window size to search for more UUIDs

  #300 opened 4 years ago by fcondo
  3

• char_write_long issue

  #285 opened 4 years ago by iscapla
  3

• Connection failure after multiple connect/disconnect cycles.

  #296 opened 4 years ago by borisw37
  1

• Problem reading characteristics

  #295 opened 4 years ago by mattie47
  1

• Bluegiga chip reset cause issue in VM environment

  #298 opened 4 years ago by paulianttila
  1

• How to send indication ACK

  #305 opened 4 years ago by Gabriel28111989
  1

• Taking data from two or more devices in real time

  #283 opened 4 years ago by nikolaskyr
  5

• Typo in bglib.py hardware_io_soft_timer should be hardware_soft_timer

  #276 opened 4 years ago by Makalov
  0

• device.subscribe() always return timeout error

  #279 opened 4 years ago by AbhishekEkhare
  1

• Connect failing using gatttool backend (bluez 5.53)

  #289 opened 4 years ago by victorromeo
  2

• Does char_write/char_read for gattool backend correctly handle long writes/reads?

  #293 opened 4 years ago by chris1seto
  1

• pygatt.scan request sudo

  #282 opened 4 years ago by RogersNelson
  1

• Use with built in bluetooth on macOS?

  #281 opened 4 years ago by niemyjski
  2

• win10+python3.7:Unable to auto-detect BLED112 serial port

  #277 opened 4 years ago by chengfeiZhou
  1

• BLE Scan using gatttool backend sometimes hangs

  #291 opened 4 years ago by guillempages
  1

• pygatt and curses

  #288 opened 4 years ago by egakupi
  1

• No module named 'pygatt'

  #280 opened 4 years ago by meluvalli
  2

• Multiple hci backends

  #299 opened 4 years ago by EricGCooper
  1

• pygatt install rPi smooth but not other platform (like chip or 64bit arm)

  #301 opened 4 years ago by esarigul
  1

• problem with disconnect callback

  #287 opened 4 years ago by tareq992403
  1