setup-beam

This action sets up an Erlang/OTP environment for use in a GitHub Actions workflow by:

installing Erlang/OTP
optionally, installing Elixir
optionally, installing Gleam
optionally, installing rebar3
optionally, installing hex
optionally, opting for strict or loose version matching
optionally, having problem matchers show warnings and errors on pull requests
optionally, using a version file (as explained in "Version file", below), to identify versions

Note: currently, this action only supports Actions' ubuntu- and windows- runtimes.

Usage

See action.yml for the action's specification.

Note: the Erlang/OTP release version specification is relatively complex. For best results, we recommend specifying exact versions, and setting option version-type to strict. However, values like 22.x, or even >22, are also accepted, and we attempt to resolve them according to semantic versioning rules. This implicitly means version-type is loose, which is also the default value for this option.

Additionally, it is recommended that one specifies versions using YAML strings, as these examples do, so that numbers like 23.0 don't end up being parsed as 23, which is not equivalent.

For pre-release versions, such as v1.11.0-rc.0, use the full version specifier (v1.11.0-rc.0) and set option version-type to strict. Pre-release versions are opt-in, so 1.11.x will not match a pre-release.

Compatibility between Operating System and Erlang/OTP

This list presents the known working version combos between the target operating system and Erlang/OTP.

Operating system	Erlang/OTP	Status
ubuntu-18.04	17 - 25	✅
ubuntu-20.04	20 - 25	✅
ubuntu-22.04	24.2 - 25	✅
windows-2019	21* - 25	✅
windows-2022	21* - 25	✅

Note *: prior to 23, Windows builds are only available for minor versions, e.g. 21.0, 21.3, 22.0, etc.

Self-hosted runners

Self-hosted runners need to set env. variable ImageOS to one of the following, since the action uses that to download assets:

ImageOS	Operating system
ubuntu18	ubuntu-18.04
ubuntu20	ubuntu-20.04
ubuntu22	ubuntu-22.04
win19	windows-2019
win22	windows-2022

as per the following example:

...

jobs:
  test:
    runs-on: self-hosted
    env:
      ImageOS: ubuntu20 # equivalent to runs-on ubuntu-20.04
    steps:
      - uses: actions/checkout@v3
      - uses: erlef/setup-beam@v1
        ...

Version file

A version file is specified via input version-file (e.g..tool-versions). This allows not having to use YML input for versions, though the action does check (and will exit with error) if both inputs are set.

Note: if you're using a version file, option version-type is checked to be strict, and will make the action exit with error otherwise.

The following version file formats are supported:

.tool-versions, as specified by asdf: Configuration

Supported version elements are the same as the ones defined for the YML portion of the action, with the following correspondence.

`.tool-versions` format

YML	`.tool-versions`
`otp-version`	`erlang`
`elixir-version`	`elixir`
`gleam-version`	`gleam`
`rebar3-version`	`rebar`

Example (Erlang/OTP + Elixir, on Ubuntu)

# create this in .github/workflows/ci.yml
on: push

jobs:
  test:
    runs-on: ubuntu-20.04
    name: OTP ${{matrix.otp}} / Elixir ${{matrix.elixir}}
    strategy:
      matrix:
        otp: ['20.3', '21.3', '22.2']
        elixir: ['1.8.2', '1.9.4']
    steps:
      - uses: actions/checkout@v3
      - uses: erlef/setup-beam@v1
        with:
          otp-version: ${{matrix.otp}}
          elixir-version: ${{matrix.elixir}}
      - run: mix deps.get
      - run: mix test

Example (Erlang/OTP + `rebar3`, on Ubuntu)

# create this in .github/workflows/ci.yml
on: push

jobs:
  test:
    runs-on: ubuntu-20.04
    name: Erlang/OTP ${{matrix.otp}} / rebar3 ${{matrix.rebar3}}
    strategy:
      matrix:
        otp: ['20.3', '21.3', '22.2']
        rebar3: ['3.14.1', '3.14.3']
    steps:
      - uses: actions/checkout@v3
      - uses: erlef/setup-beam@v1
        with:
          otp-version: ${{matrix.otp}}
          rebar3-version: ${{matrix.rebar3}}
      - run: rebar3 ct

Example (Erlang/OTP + `rebar3`, on Windows)

# create this in .github/workflows/ci.yml
on: push

jobs:
  test:
    runs-on: windows-2022
    steps:
      - uses: actions/checkout@v3
      - uses: erlef/setup-beam@v1
        with:
          otp-version: '24'
          rebar3-version: '3.16.1'
      - run: rebar3 ct

Example (Gleam on Ubuntu)

# create this in .github/workflows/ci.yml
on: push

jobs:
  test:
    runs-on: ubuntu-latest
    steps:
      - uses: actions/checkout@v3
      - uses: erlef/setup-beam@v1
        with:
          otp-version: '24'
          gleam-version: '0.23.0-rc1'
      - run: gleam test

Example (Gleam on Ubuntu without OTP)

# create this in .github/workflows/ci.yml
on: push

jobs:
  test:
    runs-on: ubuntu-latest
    steps:
      - uses: actions/checkout@v3
      - uses: erlef/setup-beam@v1
        with:
          otp-version: false
          gleam-version: '0.23.0-rc1'
      - run: gleam check

Note: the otp-version: false input is only applicable when installing Gleam.

Alternative hex.pm mirrors

It is possible to use alternative hex.pm mirror(s), in their declared order, with option hexpm-mirrors. By default, the action will use builds.hex.pm. To use other alternative mirrors, add one per line, as shown below.

# create this in .github/workflows/ci.yml
on: push

jobs:
  test:
    runs-on: ubuntu-latest
    steps:
      - uses: actions/checkout@v2
      - uses: erlef/setup-beam@v1
        with:
          otp-version: '25'
          # Use `cdn.jsdelivr.net/hex` as an alternative to `builds.hex.pm`
          hexpm-mirrors: https://cdn.jsdelivr.net/hex

Alternatively, you may try cdn.jsdelivr.net/hex if builds.hex.pm fails:

# create this in .github/workflows/ci.yml
on: push

jobs:
  test:
    runs-on: ubuntu-latest
    steps:
      - uses: actions/checkout@v2
      - uses: erlef/setup-beam@v1
        with:
          otp-version: '25'
          hexpm-mirrors: |
            https://builds.hex.pm
            https://cdn.jsdelivr.net/hex

Environment variables

Base installation folders (useful for e.g. fetching headers for NIFs) are available in the following environment variables:

INSTALL_DIR_FOR_OTP: base folder for Erlang/OTP
INSTALL_DIR_FOR_ELIXIR: base folder for Elixir
INSTALL_DIR_FOR_GLEAM: base folder for Gleam
INSTALL_DIR_FOR_REBAR3: base folder for rebar3

Elixir Problem Matchers

The Elixir Problem Matchers in this repository are adapted from here. See MATCHER_NOTICE for license details.

Action versioning

setup-beam has three version paths, described below, for example version 1.8.0:

@v1: the latest in the 1.y.z series (this tag is movable),
@v1.8: the latest in the 1.8.z series (this tag is movable),
@v1.8.0: release 1.8.0 (this tag is not movable).

We make a real effort to not introduce incompatibilities without changing the major version number. To be extra safe against changes causing issues in your CI you should specify an exact version with @vx.y.z.

License

The scripts and documentation in this project are released under the MIT license.

Contributing

Check out this doc.

Current Status

This action is in active development.

pepsico-ecommerce/setup-beam