periph/conn

Issues

• WaitForEdge Fails on Rasperry Pi Kernel 6.6.16-v8+

  #40 opened 10 months ago by gsexton
  1

• Pin state is only read if the pin's Function() method is called

  #39 opened a year ago by oddcitizenape
  5

• Debounce has issues and can be more accurate and precise

  #38 opened a year ago by chran554
  1

• WaitForEdge generated unexpected results

  #37 opened a year ago by zombie-k
  2

• bitbang: Promote software implemented SPI bus to stable

  #36 opened a year ago by maruel
  0

• conn: Define common canonical errors on buses

  #35 opened a year ago by maruel
  0

• gpiostream: Stream.Duration() assumes the bit stream is a multiple of 8

  #34 opened a year ago by maruel
  0

• i2c, pin, spi: Figure out a way for driver to communicate real chosen speed back to user

  #33 opened a year ago by maruel
  0

• gpiostream: Declare full duplex Conn

  #32 opened a year ago by maruel
  0

• i2creg, onewirereg, spireg: augment Ref to include the pins

  #31 opened a year ago by maruel
  0

• gpio: add Group interface, to act on multiple GPIO as a single transaction

  #30 opened a year ago by maruel
  0

• conn: deprecate Halt()

  #29 opened a year ago by maruel
  0

• environment: transfer and adapt Env and SenseEnv from physic into Weather and SenseWeather

  #28 opened a year ago by maruel
  0

• physic: Rename Frequency.Duration() to Frequency.Period()

  #27 opened a year ago by maruel
  0

• pin: remove Pin.Function(), merge PinFunc into Pin

  #26 opened a year ago by maruel
  0

• onewire address

  #25 opened a year ago by ea7kir
  1

• It doesn't actually denoise nor debounce

  #9 opened 2 years ago by maruel
  2

• gpioutil.Debounce not actually implemented

  #5 opened 3 years ago by lutzky
  14

• no communication with gpio pins on a raspberry pi zero 2 w

  #21 opened 3 years ago by V0r-T3x
  2

• I2C send nack

  #20 opened 3 years ago by elamre
  1

• Add an acceleration unit

  #19 opened 3 years ago by dsu-igeek
  2

• PulseIn

  #17 opened 3 years ago by 1995parham
  2

• gpio: refactor PWM to be context based

  #3 opened 4 years ago by maruel
  1

• gpioreg in v3 fails to register and list All() GPIOs on IMX8 aarch64

  #15 opened 3 years ago by romatou18
  4

• gpioreg in v3 fails to register and list All() GPIOs on IMX8 aarch64

  #14 opened 3 years ago by romatou18
  2

• Race when host.Init() is called

  #13 opened 3 years ago by eriksejr
  5

• gpio Pin Read doesn't work as expected

  #11 opened 3 years ago by gsexton
  3

• Documentation doesn't mention that gpioutil.Debounce is not fully implemented

  #8 opened 3 years ago by maruel
  0

• The parameter in both and is ignored

  #7 opened 3 years ago by maruel
  0

• There is no way to specify desired pull in

  #6 opened 3 years ago by maruel
  0

• gpio: refactor edge argument from In() into its own function Edges()

  #4 opened 4 years ago by maruel
  0

• physic: Rename ElectricalCapacitance to ElectricCapacitance

  #2 opened 4 years ago by maruel
  0

• spi: rename MISO/MOSI to COPI/CIPO

  #1 opened 4 years ago by maruel
  0