Table of Contents
- Puppet Summary
- Puppet Reporting
- Installation
- Execution
- Importing Puppet State
- Maintenance
- Metrics
- Notes On Deployment
- Github Setup
Puppet Summary
This is a simple golang based project which is designed to offer a dashboard of your current puppet-infrastructure:
- Listing all known-nodes, and their current state.
- Viewing the last few runs of a given system.
- etc.
This project is directly inspired by the puppet-dashboard project, reasons why you might prefer this project:
- It is actively maintained.
- Unlike puppet-dashboard.
- Deployment is significantly simpler.
- This project only involves deploying a single binary.
- It allows you to submit metrics to a carbon-receiver.
- The metrics include a distinct count of each state, allowing you to raise alerts when nodes in the failed state are present.
- The output can be used for scripting, and automation.
- All output is available as JSON/XML in addition to human-viewable HTML.
You can get a good idea of what the project does by looking at the screens:
You can also consult the API documentation:
Puppet Reporting
The puppet-server has integrated support for submitting reports to a central location, via HTTP POSTs. This project is designed to be a target for such submission:
- Your puppet-master submits reports to this software.
- The reports are saved locally, as YAML files, beneath
./reports
- They are parsed and a simple SQLite database keeps track of them.
- The reports are saved locally, as YAML files, beneath
- The SQLite database is used to present a visualization layer.
- Which you can see in the screenshots.
The reports are expected to be pruned over time, but as the SQLite database only contains a summary of the available data it will not grow excessively.
The software has been reported to cope with 16k reports per day, archive approximately 27Gb of data over 14 days!
Installation
There are two ways to install this project from source, which depend on the version of the go version you're using.
If you just need the binaries you can find them upon the project release page.
Source Installation go <= 1.11
If you're using go
before 1.11 then the following command should fetch/update the project and install it upon your system:
$ go get -u github.com/skx/puppet-summary
Source installation go >= 1.12
If you're using a more recent version of go
(which is highly recommended), you need to clone to a directory which is not present upon your GOPATH
:
git clone https://github.com/skx/puppet-summary
cd puppet-summary
go install
Execution
Once installed you can launch it directly like so:
$ puppet-summary serve
Launching the server on http://127.0.0.1:3001
If you wish to change the host/port you can do so like this:
$ puppet-summary serve -host 10.10.10.10 -port 4321
Launching the server on http://10.10.10.10:4321
Other sub-commands are described later, or can be viewed via:
$ puppet-summary help
Importing Puppet State
Once you've got an instance of puppet-summary
installed and running
the next step is to populate it with report data. The expectation is
that you'll update your puppet server to send the reports to it directly,
by editing puppet.conf
on your puppet-master:
[master]
reports = store, http
reporturl = http://localhost:3001/upload
- If you're running the dashboard on a different host you'll need to use the external IP/hostname here.
- Once you've changed your master's configuration don't forget to restart the service!
If you don't wish to change your puppet-server initially you can test what it would look like by importing the existing YAML reports from your puppet-master. Something like this should do the job:
# cd /var/lib/puppet/reports
# find . -name '*.yaml' -exec \
curl --data-binary @\{\} http://localhost:3001/upload \;
- That assumes that your reports are located beneath
/var/lib/puppet/reports
, but that is a reasonable default. - It also assumes you're running the
puppet-summary
instance upon the puppet-master, if you're on a different host remember to change the URI.
Maintenance
Over time your reports will start to consuming ever-increasing amounts of disk-space so they should be pruned. To prune (read: delete) old reports run:
puppet-summary prune -days 7 -prefix ./reports/
That will remove the saved YAML files from disk which are over 7 days old, and it will also remove the associated database entries that refer to them.
If you're happy with the default pruning behaviour, which is particularly useful when you're running this software in a container, described in HACKING.md, you can prune old reports automatically once per week without the need to add a cron-job like so:
puppet-summary serve -auto-prune [options..]
If you don't do this you'll need to add a cronjob to ensure that the prune-subcommand runs regularly.
Nodes which had previously submitted updates to your puppet-master, and puppet-summary
service, but which have failed to do so "recently", will be listed in the web-based user-interface, in the "orphaned" column. Orphaned nodes will be reaped over time, via the days
option just discussed. If you explicitly wish to clean removed-hosts you can do so via:
puppet-summary prune -verbose -orphaned
Metrics
If you have a carbon-server running locally you can also submit metrics to it :
puppet-summary metrics \
-host carbon.example.com \
-port 2003 \
-prefix puppet.example_com [-nop]
The metrics include the count of nodes in each state, changed
, unchanged
, failed
, and orphaned
and can be used to raise alerts when things fail. When running with -nop
the metrics will be dumped to the console instead of submitted.
Notes On Deployment
If you can run this software upon your puppet-master then that's the ideal, that way your puppet-master would be configured to uploaded your reports to 127.0.0.1:3001/upload
, and the dashboard itself may be viewed via a reverse-proxy.
The appeal of allowing submissions from the loopback is that your reverse-proxy can deny access to the upload end-point, ensuring nobody else can submit details. A simple nginx configure might look like this:
server {
server_name reports.example.com;
listen [::]:80 default ipv6only=off;
## Puppet-master is the only host that needs access here
## it is configured to POST to localhost:3001 directly
## so we can disable access here.
location /upload {
deny all;
}
## send all traffic to the back-end
location / {
proxy_pass http://127.0.0.1:3001;
proxy_redirect off;
proxy_set_header X-Forwarded-For $remote_addr;
}
}
- Please don't run this application as root.
- The defaults are sane, YAML files are stored beneath
./reports
, and the SQLite database is located at "./ps.db
.- Both these values can be changed, but if you change them you'll need to remember to change for all appropriate actions.
- For example "
puppet-summary serve -db-file ./new.db
", "puppet-summary metrics -db-file ./new.db
", and "puppet-summary prune -db-file ./new.db
".
- For example "
- Both these values can be changed, but if you change them you'll need to remember to change for all appropriate actions.
Github Setup
This repository is configured to run tests upon every commit, and when pull-requests are created/updated. The testing is carried out via .github/run-tests.sh which is used by the github-action-tester action.
Releases are automated in a similar fashion via .github/build, and the github-action-publish-binaries action.