minmea, a lightweight GPS NMEA 0183 parser library

Minmea is a minimalistic GPS parser library written in pure C intended for resource-constrained platforms, especially microcontrollers and other embedded systems.

Features

Written in ISO C99.
No dynamic memory allocation.
No floating point usage in the core library.
Supports both fixed and floating point values.
One source file and one header - can't get any simpler.
Easily extendable to support new sentences.
Complete with a test suite and static analysis.

Supported sentences

RMC (Recommended Minimum: position, velocity, time)
GGA (Fix Data)
GSA (DOP and active satellites)
GLL (Geographic Position: Latitude/Longitude)
GST (Pseudorange Noise Statistics)
GSV (Satellites in view)

Adding support for more sentences is trivial; see minmea.c source.

Fractional number format

Internally, minmea stores fractional numbers as pairs of two integers: {value, scale}. For example, a value of "-123.456" would be parsed as {-123456, 1000}. As this format is quite unwieldy, minmea provides the following convenience functions for converting to either fixed-point or floating-point format:

minmea_rescale({-123456, 1000}, 10) => -1235
minmea_float({-123456, 1000}) => -123.456

The compound type struct minmea_float uses int_least32_t internally. Therefore, the coordinate precision is guaranteed to be at least [+-]DDDMM.MMMMM (five decimal digits) or ±20cm LSB at the equator.

Coordinate format

NMEA uses the clunky DDMM.MMMM format which, honestly, is not good in the internet era. Internally, minmea stores it as a fractional number (see above); for practical uses, the value should be probably converted to the DD.DDDDD floating point format using the following function:

minmea_tocoord({-375165, 100}) => -37.860832

The library doesn't perform this conversion automatically for the following reasons:

The conversion is not reversible.
It requires floating point hardware.
The user might want to perform this conversion later on or retain the original values.

Example

char line[MINMEA_MAX_LENGTH];
while (fgets(line, sizeof(line), stdin) != NULL) {
    switch (minmea_sentence_id(line)) {
        case MINMEA_SENTENCE_RMC: {
            struct minmea_sentence_rmc frame;
            if (minmea_parse_rmc(&frame, line)) {
                printf("$RMC: raw coordinates and speed: (%d/%d,%d/%d) %d/%d\n",
                        frame.latitude.value, frame.latitude.scale,
                        frame.longitude.value, frame.longitude.scale,
                        frame.speed.value, frame.speed.scale);
                printf("$RMC fixed-point coordinates and speed scaled to three decimal places: (%d,%d) %d\n",
                        minmea_rescale(&frame.latitude, 1000),
                        minmea_rescale(&frame.longitude, 1000),
                        minmea_rescale(&frame.speed, 1000));
                printf("$RMC floating point degree coordinates and speed: (%f,%f) %f\n",
                        minmea_tocoord(&frame.latitude),
                        minmea_tocoord(&frame.longitude),
                        minmea_tofloat(&frame.speed));
            }
        } break;

        case MINMEA_SENTENCE_GGA: {
            struct minmea_sentence_gga frame;
            if (minmea_parse_gga(&frame, line)) {
                printf("$GGA: fix quality: %d\n", frame.fix_quality);
            }
        } break;

        case MINMEA_SENTENCE_GSV: {
            struct minmea_sentence_gsv frame;
            if (minmea_parse_gsv(&frame, line)) {
                printf("$GSV: message %d of %d\n", frame.msg_nr, frame.total_msgs);
                printf("$GSV: sattelites in view: %d\n", frame.total_sats);
                for (int i = 0; i < 4; i++)
                    printf("$GSV: sat nr %d, elevation: %d, azimuth: %d, snr: %d dbm\n",
                        frame.sats[i].nr,
                        frame.sats[i].elevation,
                        frame.sats[i].azimuth,
                        frame.sats[i].snr);
            }
        } break;
    }
}

Integration with your project

Simply add minmea.[ch] to your project, #include "minmea.h" and you're good to go.

Running unit tests

Building and running the tests requires the following:

Check Framework (http://check.sourceforge.net/).
Clang Static Analyzer (http://clang-analyzer.llvm.org/).

If you have both in your $PATH, running the tests should be as simple as typing make.

Limitations

Only a handful of frames is supported right now.
There's no support for omitting parts of the library from building. As a workaround, use the -ffunction-sections -Wl,--gc-sections linker flags (or equivalent) to remove the unused functions (parsers) from the final image.
Some systems lack timegm. On these systems, the recommended course of action is to build with -Dtimegm=mktime which will work correctly as long the system runs in the default UTC timezone. Native Windows builds should use -Dtimegm=_mkgmtime instead which will work correctly in all timezones.

Bugs

There are plenty. Report them on GitHub, or - even better - open a pull request. Please write unit tests for any new functions you add - it's fun!

Licensing

Minmea is open source software; see COPYING for amusement. Email me if the license bothers you and I'll happily re-license under anything else under the sun.

Author

Minmea was written by Kosma Moczek <kosma@cloudyourcar.com> at Cloud Your Car.

phaltness/minmea