Communicate with Homegear server over XML-RPC
hm-prowee -u <user> -s <server> -p <port> list
hm-prowee -u <user> -s <server> -p <port> print-config <id>
hm-prowee -u <user> -s <server> -p <port> set-temp <id> <file>
<user>is the user created in homegear to connect to, follow the homegear documentation on user management- the password for the connection will be prompted after execution of the program
<server>specifies the address of your homegear server as hostname or IP (homegearpi.local,localhostor192.168.1.1), not in URL Syntax (like "http://example.com")<port>is the RPC server port
There are two default ports to use with homegear (0.60). Connnections are SSL encrypted on both 2002 and 2003. Attention: Only the later actually verifies the provided username and password. For further details check and edit /etc/homegear/rpcservers.conf.
The list-command will list all devices with type "0x95", which means the "HM-CC-RT-DN"-Devices.
The print-config will print the actual config of the <id>.
The set-temp command will then set the device with the id the temperature config from the file. For the syntax of the file see below.
Example file:
MONDAY = 17.0 > 15:00; 20.0 > 19:00; 19.0 > 24:00;
TUESDAY = 17.0 > 15:00; 20.0 > 19:00; 19.0 > 24:00;
WEDNESDAY = 17.0 > 15:00; 20.0 > 19:00; 19.0 > 24:00;
THURSDAY = 17.0 > 15:00; 20.0 > 19:00; 19.0 > 24:00;
FRIDAY = 17.0 > 15:00; 20.0 > 19:00; 19.0 > 24:00;
SATURDAY = 17.0 > 09:00; 19.5 > 19:00; 19.0 > 24:00;
SUNDAY = 17.0 > 10:00; 19.5 > 19:00; 19.0 > 24:00;
The lines should start with the day of week. It should be uppercase.
After the equal sign there can be 13 sets temperature intervals. This number is limited by the device itself.
The sets should be read as <temperature> until <time>. The first interval starts at 00:00. So the line for "MONDAY" reads as "set 17°C until 15:00, then set it to 20°C until 19:00, then 19°C until 24:00". The last set should always last until 24:00. The intervals should be consecutive.
There no checking included in the script (yet)!