Pinned Repositories
2820gpssim
Fixed GPS Position Simulator for IC-2820
AMBE3003USB
AMBE 3003 USB PCB
ConverterDisplay
Nextion TFT display control for AMSAT-DL Es'Hail2 QO-100 Up/Down Converters
HackBert
Source Code for HackBert
MMDVM_HS_Dual_Hat
Duplex variant of MMDVM_HS_Hat
MMDVM_HS_Hat
MMDVM_HS Hat for the Raspberry Pi (Zero)
NEC21a_prog_Adapter
NEC21a_prog_Adapter
POCSAG_HS
POCSAG Firmware for MMDVM_HS_Hat boards
Quantar-Dashboard
Attempt to make a simple Dashboard Monitoring the Quantar Base Station
wavelog
Webbased Amateur Radio Logging Software - Log your contacts from everywhere!
phl0's Repositories
phl0/ConverterDisplay
Nextion TFT display control for AMSAT-DL Es'Hail2 QO-100 Up/Down Converters
phl0/Cloudlog
Web based amateur radio logging application built using PHP & MySQL supports general station logging tasks from HF to Microwave with supporting applications to support CAT control.
phl0/CloudLogCatQt
Qt app (Linux, Windows, Mac) for providing CAT support for Cloudlog http://www.cloudlog.co.uk/
phl0/cloudLogOffline
An App as Offline Frontend for CloudLog
phl0/cqrlog
Linux logging program for amateur radio operators
phl0/esp32-eink-sat-timerstatus
Display active FM sats on eInk display
phl0/Module_17
M17 module
phl0/NucleoTNC
The Nucleo TNC is a breadboard implementation of the Mobilinkd TNC3 using a STM32L432KC Nucleo32 board. This TNC faithfully implements the audio section and EEPROM storage of the TNC3. It omits the battery charging and Bluetooth components of the TNC3. It presents as a KISS TNC over a USB serial port. This repository contains the build instruction
phl0/PiPicoKeyer
phl0/RPR-TNC
phl0/wavelog
Webbased Amateur Radio Logging Software - Log your contacts from everywhere!
phl0/gqrx
Software defined radio receiver powered by GNU Radio and Qt.
phl0/gr-osmosdr
Mirrored from git://git.osmocom.org/gr-osmosdr
phl0/gr-satellites
GNU Radio decoders for several Amateur satellites
phl0/hamlog
:radio: HAM Radio Contest Log Converter
phl0/M17Gateway
A gateway to the M17 reflectors
phl0/MMDVM
The firmware for the MMDVM (Multi-Mode Digital Voice Modem)
phl0/MMDVMHost
The host program for the MMDVM
phl0/NXDNClients
A gateway, parrot and reflector for NXDN.
phl0/QO100_SPK_ctrl
Speaker control unit for full-duplex satellite operations for the sake of demonstration
phl0/qsstv_cloudlog
Python script to upload QSO data from qsstv
phl0/SatPC32-To-Cloudlog
C# Application that interfaces SatPC32 :satellite: DDE interface to Cloudlog. Allowing pre populating of satellite name, modes & frequencies.
phl0/svxlink
Advanced repeater system software with EchoLink support for Linux including a GUI, Qtel - the Qt EchoLink client
phl0/trackdirect
APRS Track Direct is a collection of tools that can be used to run an APRS website.
phl0/UniPager
Universal POCSAG transmitter controller written in Rust.
phl0/wajalist
Generate WAJA List from ADIF
phl0/waslist
Generate WAS List from ADIF
phl0/WordClock
A custom WordClock project.
phl0/xlxd
HAM radio multiprotocol dstar reflector server
phl0/Yaesu_amsat_trx