Also compatible with Meiantech, Allarmi365, and others
python3 -m pip install ialarmclient-phoenix#!/usr/bin/env python
import asyncio
import ialarmclient
async def start():
ialarm = ialarmclient.IalarmClient(
username="username", # <- Your alarm web interface username
password="password", # <- Your alarm web interface password
url="http://192.168.123.123" # <- Your alarm web interface URL (no trailing slash)
)
# Refresh alarm status, to be called every time you need to read updated information
# May take up to 30-40 seconds the first time. Subsequent calls will be almost immediate.
await ialarm.refresh()
# Retrieve information about your alarm zones (name, status, etc...)
zones = await ialarm.get_zones()
for zone in zones:
if zone.type != ialarmclient.ZONE_TYPE_DISABLED:
print("Zone {} is {}".format(zone.number, zone.name))
# Other information can be read (see IalarmZone)
# Retrieve alarm status (armed, disarmed, power failure, etc...)
status = await ialarm.get_status()
# Commands to arm/disarm your system
await ialarm.arm_stay()
await ialarm.arm_away()
await ialarm.disarm()
await ialarm.cancel_alarm()
# List all zones in alarm
status = await ialarm.get_status()
for alarmed_zone in status.alarmed_zones:
print("Zone {} is alarmed".format(alarmed_zone.name))
# Status information for your system
if status.power_source_failure:
print("Power failure")
if status.low_battery:
print("Low battery")
if status.panic_alarm:
print("Panic alarm triggered")
if status.arm_status == ialarmclient.STATUS_ARMED_AWAY:
print("System armed")
elif status.arm_status == ialarmclient.STATUS_ARMED_STAY:
print("System armed (STAY)")
elif status.arm_status == ialarmclient.STATUS_DISARMED:
print("System disarmed")
if __name__ == "__main__":
loop = asyncio.get_event_loop()
loop.run_until_complete(start())