lws-esp32-factory

This is a standalone <1MB image intended for the 1MB "factory" slot on ESP32.

This image is designed to look after "generic device configuration"... it means:

Automated generation of 2048-bit selfsigned certs on the device at first boot
Selecting up to 4 APs the device can connect to along with necessary passphrases
Updating the user application OTA
Automated Let's Encrypt certificate acquisition (requires external :443 forwarded to the device :443)

Your actual "OTA" application is something completely different, and has its own 2.9MB flash area. This -factory app is designed to take care of all common setup stuff and put it in nvs to be shared with the OTA app.

This now uses HTTP/2 serving from libwebsockets :-)

It also now supports ws-over-http2 tunelling, meaning all the ws connections and the http actions share the same tls tunnel. This makes a massive improvement in speed and reduced memory consumption.

As of 2018-03-14 only Chrome Canary 67 supports this new mode, but support in other browsers is coming.

It has the following capabilities:

The first boot after flashing, the device will create its own selfsigned certificate and key.

After generating the cert, if there is no AP information yet, the server up automatically at https://192.168.4.1 in AP mode.

The user can reach -factory subsequently programmatically or by grounding a GPIO (ie, by a button), the default GPIO is IO14.

-factory allows you to select an AP from a scan list and give a passphrase. It supports four AP slots, for, eg, home and work environments, and it handles the scan and acquire of the APs.

Once it connects, the DHCP information is shown, and it autonomously connects to a configurable server over https to check for updates. The user can select to have it autonomously download the update and restart.

The user can also upload images by hand. The factory image understands how to update both the 1MB factory slot itself and the single 2.9MB OTA slot using autonomous upload from a server or the browser based file upload.

Optional default peripherals

It's not required, but the default code expects

pushbutton to 0V connected on IO14, with pullup to 3.3V

If the pushbutton is held down at boot, the user is forced into the factory / Setup mode rather than the OTA application.

Note: Default selection of GPIO14 should be changed to another value when debugging with JTAG. Pins reserved for ESP32 JTAG: GPIO12, GPIO13, GPIO14 and GPIO15.

LED connected via, eg, 330R 3.3V ---|>|-----/\/\/\---- IO23

While in factory / OTA mode, the LED flashes dows a PWM sine cycle at about 1Hz. When you press "ID Device" button in the UI, the LED does the since cycle rapidly for 10s, so you can be sure which physical device you are talking to.

Building and using

This was built and tested against esp-idf at 4b91c82cc447640e5b61407e810f1d6f3eabd233 from Jun 20, 2018. You can force esp-idf to that commit by cloning / pulling / fetching the latest esp-idf and then doing git reset --hard 4b91c82cc447640e5b61407e810f1d6f3eabd233 in the esp-idf directory.

Esp-idf is in constant flux you may be able to use the latest without problems but if not, revert it to the above commit that has been tested before complaining.

Esp-idf also has dependencies on toolchain, at the time of writing it recommends this toolchain version (for 64-bit linux)

1.22.0-75-gbaf03c2

Don't forget to do git submodule init ; git submodule update --recursive after fetching projects like esp-idf with submodules.
After updating esp-idf, or this project or components, remove your old build dir with rm -rf build before rebuilding.

Step 0: Install prerequisites

0.1: genromfs

For Ubuntu / Debian and Fedora at least, the distro package is called "genromfs"

Under Windows on MSYS2 environment you will need to separately build genromfs and add it to the path:

git clone https://github.com/chexum/genromfs.git
make
cp genromfs /mingw32/bin/

0.2: recent CMake

CMake v2.8 is too old... v3.7+ are known to work OK and probably other intermediate versions are OK.

Under Windows on MSYS2 environment you will need to install cmake: pacman -S mingw-w64-i686-cmake

0.3: OSX users: GNU stat

     $ brew install coreutils

Step 1: Clone and get lws submodule

     $ git clone git@github.com:warmcat/lws-esp32-factory.git
     $ git submodule update --init --recursive

Step 2: Erase the whole device

Clear down the partitioning since we write a custom table and the bootloader will choke if the OTA parts are not initialized like this one time

 $ make erase_flash

Step 3: General build and flash

First one time each session set an env var in your shell to override the tty port

 $ export ESPPORT=/dev/ttyUSB0

Then you can just do

 $ make flash monitor

First boot

During the first boot, there will be a pause of a minute or so while the selfsigned TLS certificate is generated.

Afterwards it continues boot normally.

Using the Setup app

connect your wifi to the ap "ESP_...."
In a browser, go to https://192.168.4.1
Click on the radio button for AP slot 1
Select your normal AP from the list
Give the AP password and click the button
Your ESP32 should associate with the AP without resetting

Using the lws test apps

This application is just the factory / setup application.

The end-user applications are separate projects, see eg

https://github.com/warmcat/lws-esp32-test-server-demos

These are built and loaded slightly differently, ie

 $ make lws_flash_ota monitor

This is because they target the 2.9MB OTA flash area.

The build/*.bin file from the application build may also be uploaded in the setup page upload UI.

NOTE: the first time you flash the OTA application, you need to do it using the upload file button or the autonomous update facility in the Factory App. The bootloader requires it to not only be flashed, but marked as bootable.

Subsequently you can just reflash the OTA partition with make lws_flash_ota or use the upload or autonomous update stuff in the -factory app.

Note for Firefox users

Firefox has a longstanding, unfixed bug dealing with selfsigned certs. As you add more exceptions for them, firefox bogs down processing the validity of the certs. Symptoms are slow (eventually very slow) browser performance sending data on the accepted SSL connection.

https://bugzilla.mozilla.org/show_bug.cgi?id=1056341

Symptom is your browser box's cpu burns while it sits there. Workaround is to delete the cert8.db file in your firefox user config, on my box it was ~/.mozilla/firefox/blah.default/cert8.db.

This isn't related to lws but affects all firefox usage with selfsigned certs...

physiii/game-switcher