pichenettes/eurorack

Issues

• Convert EAGLE files to XML

  #47 opened 2 years ago by electron271
  10

• 2-OP FM broken in Plaits 1.2

  #64 opened 7 months ago by RobertPabst
  0

• Stages Schematic v70 Channel numbers / Pot and LED designation

  #63 opened 9 months ago by AlistairJohnsonG
  1

• Problems building Plaits Code

  #57 opened 9 months ago by AlistairJohnsonG
  2

• Plaits issue with chiptune mode

  #61 opened a year ago by ctag-fh-kiel
  0

• Inconsistent alt wave Aux envelope behaviour

  #59 opened a year ago by bowlneudel
  1

• Add Beads

  #45 opened 3 years ago by electron271
  9

• Plaits - resources/waveterrains.py missing file ??

  #56 opened a year ago by forestcaver
  2

• various arrays intended as const are not, and so are consuming RAM

  #55 opened a year ago by expertsleepers
  4

• braids decimation with envelope & AD_VCA

  #54 opened a year ago by boochow
  1

• A couple of variables are assigned values twice successively

  #53 opened 2 years ago by SteveRussell33
  1

• Missing file "variable_shape_oscillator.h" when compiling the target stages

  #51 opened 2 years ago by Leaumonte
  4

• where is the file---"bootloader.hex"?

  #50 opened 2 years ago by LegendaryTeacherLiu
  5

• Blades airwires reported (no connection to GND)

  #46 opened 3 years ago by forestcaver
  4

• plaits / chord engine "pop"

  #43 opened 3 years ago by ypujante
  8

• Braids Envelope.h is licensed GPL

  #41 opened 3 years ago by jonbro
  2

• No Aux in plaits when harmonics set to 0.5

  #40 opened 3 years ago by ypujante
  3

• Instructions for uploading firmware using OSX

  #28 opened 4 years ago by catkins
  2

• [Question] PCB viewer

  #36 opened 3 years ago by deadeert
  2

• Surge and Clouds?

  #35 opened 4 years ago by baconpaul
  9

• Ripples V0.2 files availability

  #33 opened 4 years ago by searingmoggy
  2

• Ripples v90 cad files missing

  #32 opened 4 years ago by karshan
  1

• Out of bounds access in Plaits

  #26 opened 5 years ago by claudiocabral
  0

• Make gives `LoopFillZerobss' undefined reference to `main'

  #22 opened 5 years ago by jpnielsen
  1

• Yarns INIT resets calibration settings

  #19 opened 6 years ago by dturner
  3

• clouds_test failing on static assertion

  #6 opened 7 years ago by ywwg
  0

• wrong value on schematic braids_v50

  #9 opened 7 years ago by thopman
  2

• Ripples : Board and schematic not consistent

  #12 opened 7 years ago by Banshee700
  1

• Yarns upload_combo_jtag hex file with following error

  #7 opened 8 years ago by altitude909
  3

• Edges makefile has EXTRA_DEFINES =-DOCTAL_ADC commented out

  #8 opened 8 years ago by altitude909
  1

• Is stm32f405rgt6 a LQFP part?

  #1 opened 8 years ago by MartinMcGrath
  1