pimoroni/pantilt-hat

Issues

• raise IOError("Failed to read byte")

  #29 opened 4 years ago by peterss7
  8

• apt-get install pimoroni does not work

  #31 opened 2 years ago by jhwinters
  5

• pantilthat 0.0.7 in pip fails.

  #22 opened 2 years ago by e270889o
  1

• Looking to make this work with pca9865 module

  #28 opened 4 years ago by petrella56
  0

• Tilt range seems incorrect

  #27 opened 4 years ago by scott0123
  2

• HAT power supply

  #26 opened 4 years ago by jp3spinelli
  0

• pan() and tilt() with no delay between leaves servos stuck

  #17 opened 5 years ago by bringert
  1

• Upgrade from rPi3 to rPi4 no more movement

  #24 opened 5 years ago by prutsky
  1

• Pimoroni dashboard wont work in Buster

  #23 opened 5 years ago by e270889o
  1

• v0.0.5 error: no version_info

  #19 opened 6 years ago by robmarkcole
  2

• By default `get_pan` and `get_tilt` error with an out of range value after cold boot

  #18 opened 7 years ago by Gadgetoid
  1

• RGB WS2812 LEDs do not work

  #14 opened 7 years ago by veryalien
  1

• Allow servos time to move before script exit

  #9 opened 7 years ago by Gadgetoid
  1

• pantilthat not available for python2

  #16 opened 7 years ago by ryderdonahue
  1

• Reading current servo values

  #5 opened 7 years ago by pambrose
  3

• py3.5 install error

  #12 opened 7 years ago by robmarkcole
  2

• module isnt working even afterinstall is complete

  #11 opened 7 years ago by acevedoa9805
  1

• Getting angles - 'get_servo_two' returns the angle of servo_1

  #10 opened 7 years ago by baychillidog
  6

• Documentation and edge pins

  #8 opened 8 years ago by RogerHardiman
  1

• python3-smbus required

  #6 opened 8 years ago by sejgit
  1