Copy this elsner folder to <config_dir>/custom_components/elsner/.
Add the following to your configuration.yaml file:
# configuration.yaml entry
sensor:
- platform: elsner
name: weather_station
serial_port: dev/ttyUSB0
template:
- sensor:
- name: Temperature
unit_of_measurement: "°C"
state: "{{ iif(states('sensor.weather_station')[1:6] | int >= 0, states('sensor.weather_station')[2:6], states('sensor.weather_station')[1:6]) }}"
device_class: current
- name: Sun south
unit_of_measurement: "kLux"
state: "{{ states('sensor.weather_station')[6:8] }}"
device_class: current
- name: Sun west
unit_of_measurement: "kLux"
state: "{{ states('sensor.weather_station')[8:10] }}"
device_class: current
- name: Sun east
unit_of_measurement: "kLux"
state: "{{ states('sensor.weather_station')[10:12] }}"
device_class: current
- name: is dark
unit_of_measurement: "bool"
state: >
{% if 'J' in states('sensor.weather_station'[12]) -%}
0
{% else -%}
1
{% endif -%}
device_class: current
- name: Daylight
unit_of_measurement: "Lux"
state: "{{ states('sensor.weather_station')[13:16] }}"
device_class: current
- name: Wind
unit_of_measurement: "km/h"
state: "{{ (states('sensor.weather_station')[16:20] | float * 3.6) }}"
device_class: current
- name: is raining
unit_of_measurement: "bool"
state: >
{% if 'J' in states('sensor.weather_station'[20]) -%}
1
{% else -%}
0
{% endif -%}