RSpec::Benchmark

Performance testing matchers for RSpec to set expectations on speed, resources usage and scalability.

RSpec::Benchmark is powered by:

benchmark-perf for measuring execution time and iterations per second.
benchmark-trend for estimating computation complexity.
benchmark-malloc for measuring object and memory allocations.

Why?

Integration and unit tests ensure that changing code maintains expected functionality. What is not guaranteed is the code changes impact on library performance. It is easy to refactor your way out of fast to slow code.

If you are new to performance testing you may find Caveats section helpful.

1. Usage
2. Compounding
3. Configuration
4. Filtering
5. Caveats

Installation

Add this line to your application's Gemfile:

gem 'rspec-benchmark'

And then execute:

$ bundle

Or install it yourself as:

$ gem install rspec-benchmark

1. Usage

For matchers to be available globally, in spec_helper.rb do:

require 'rspec-benchmark'

RSpec.configure do |config|
  config.include RSpec::Benchmark::Matchers
end

This will add the following matchers:

perform_under to see how fast your code runs
perform_at_least to see how many iteration per second your code can do
perform_(faster|slower)_than to compare implementations
perform_(constant|linear|logarithmic|power|exponential) to see how your code scales with time
perform_allocation to limit object and memory allocations

These will help you express expected performance benchmark for an evaluated code.

Alternatively, you can add matchers for particular example:

RSpec.describe "Performance testing" do
  include RSpec::Benchmark::Matchers
end

Then you're good to start setting performance expectations:

expect {
  ...
}.to perform_under(6).ms

1.1 Timing

The perform_under matcher answers the question of how long does it take to perform a given block of code on average. The measurements are taken executing the block of code in a child process for accurate CPU times.

expect { ... }.to perform_under(0.01).sec

All measurements are assumed to be expressed as seconds. However, you can also provide time in ms, us and ns. The equivalent example in ms would be:

expect { ... }.to perform_under(10).ms
expect { ... }.to perform_under(10000).us

By default the above code will be sampled only once but you can change this by using the sample matcher like so:

expect { ... }.to perform_under(0.01).sample(10) # repeats measurements 10 times

For extra expressiveness you can use times:

expect { ... }.to perform_under(0.01).sample(10).times

You can also use warmup matcher that can run your code before the actual samples are taken to reduce erratic execution times.

For example, you can execute code twice before you take 10 actual measurements:

expect { ... }.to perform_under(0.01).sec.warmup(2).times.sample(10).times

1.2 Iterations

The perform_at_least matcher allows you to establish performance benchmark of how many iterations per second a given block of code should perform. For example, to expect a given code to perform at least 10K iterations per second do:

expect { ... }.to perform_at_least(10000).ips

The ips part is optional but its usage clarifies the intent.

The performance timing of this matcher can be tweaked using the within and warmup matchers. These are expressed as seconds.

By default within matcher is set to 0.2 second and warmup matcher to 0.1 respectively. To change how long measurements are taken, for example, to double the time amount do:

expect { ... }.to perform_at_least(10000).within(0.4).warmup(0.2).ips

The higher values for within and warmup the more accurate average readings and more stable tests at the cost of longer test suite overall runtime.

1.3 Comparison

The perform_faster_than and perform_slower_than matchers allow you to test performance of your code compared with other. For example:

expect { ... }.to perform_faster_than { ... }
expect { ... }.to perform_slower_than { ... }

And if you want to compare how much faster or slower your code is do:

expect { ... }.to perform_faster_than { ... }.once
expect { ... }.to perform_faster_than { ... }.twice
expect { ... }.to perform_faster_than { ... }.exactly(5).times
expect { ... }.to perform_faster_than { ... }.at_least(5).times
expect { ... }.to perform_faster_than { ... }.at_most(5).times

expect { ... }.to perform_slower_than { ... }.once
expect { ... }.to perform_slower_than { ... }.twice
expect { ... }.to perform_slower_than { ... }.at_least(5).times
expect { ... }.to perform_slower_than { ... }.at_most(5).times
expect { ... }.to perform_slower_than { ... }.exactly(5).times

The times part is also optional.

The performance timing of each matcher can be tweaked using the within and warmup matchers. These are expressed as seconds. By default within matcher is set to 0.2 and warmup matcher to 0.1 second respectively. To change these matchers values do:

expect { ... }.to perform_faster_than { ... }.within(0.4).warmup(0.2)

The higher values for within and warmup the more accurate average readings and more stable tests at the cost of longer test suite overall runtime.

1.4 Complexity

The perform_constant, perform_logarithmic, perform_linear, perform_power and perform_exponential matchers are useful for estimating the asymptotic behaviour of a given block of code. The most basic way to use the expectations to test how your code scales is to use the matchers:

expect { ... }.to perform_constant
expect { ... }.to perform_logarithmic/perform_log
expect { ... }.to perform_linear
expect { ... }.to perform_power
expect { ... }.to perform_exponential/perform_exp

To test performance in terms of computation complexity you can follow the algorithm:

Choose a method to profile.
Choose workloads for the method.
Describe workloads with input features.
Assert the performance in terms of Big-O notation.

Often, before expectation can be set you need to setup some workloads. To create a range of inputs use the bench_range helper method.

For example, to create a power range of inputs from 8 to 100_000 do:

sizes = bench_range(8, 100_000) # => [8, 64, 512, 4096, 32768, 100000]

Then you can use the sizes to create test data, for example to check Ruby's max performance create array of number arrays.

number_arrays = sizes.map { |n| Array.new(n) { rand(n) } }

Using in_range matcher you can inform the expectation about the inputs. Each range value together with its index will be yielded as arguments to the evaluated block.

You can either specify the range limits:

expect { |n, i|
  number_arrays[i].max
}.to perform_linear.in_range(8, 100_000)

Or use previously generated sizes array:

expect { |n, i|
  number_arrays[i].max
}.to perform_linear.in_range(sizes)

This example will generate and yield input n and index i pairs [8, 0], [64, 1], [512, 2], [4K, 3], [32K, 4] and [100K, 5] respectively.

By default the range will be generated using ratio of 8. You can change this using ratio matcher:

expect { |n, i|
  number_arrays[i].max
}.to perform_linear.in_range(8, 100_000).ratio(2)

The performance measurements for a code block are taken only once per range input. You can increase the stability of your performance test by using the sample matcher. For example, to repeat measurements 100 times for each range input do:

expect { |n, i|
  number_arrays[i].max
}.to perform_linear.in_range(8, 100_000).ratio(2).sample(100).times

The overall quality of the performance trend is assessed using a threshold value where 0 means a poor fit and 1 a perfect fit. By default this value is configured to 0.9 as a 'good enough' threshold. To change this use threshold matcher:

expect { |n, i|
  number_arrays[i].max
}.to perform_linear.in_range(8, 100_000).threshold(0.95)

1.5 Allocation

The perform_allocation matcher checks how much memory or objects have been allocated during a piece of Ruby code execution.

By default the matcher verifies the number of object allocations. The specified number serves as the upper limit of allocations, so your tests won't become brittle as different Ruby versions change internally how many objects are allocated for some operations.

Note that you can also check for memory allocation using the bytes matcher.

To check number of objects allocated do:

expect {
  ["foo", "bar", "baz"].sort[1]
}.to perform_allocation(3)

You can also be more granular with your object allocations and specify which object types you're interested in:

expect {
  _a = [Object.new]
  _b = {Object.new => 'foo'}
}.to perform_allocation({Array => 1, Object => 2}).objects

And you can also check how many objects are left when expectation finishes to ensure that GC is able to collect them.

expect {
  ["foo", "bar", "baz"].sort[1]
}.to perform_allocation(3).and_retain(3)

You can also set expectations on the memory size. In this case the memory size will serve as upper limit for the expectation:

expect {
  _a = [Object.new]
  _b = {Object.new => 'foo'}
}.to perform_allocation({Array => 40, Hash => 384, Object => 80}).bytes

2. Compounding

All the matchers can be used in compound expressions via and/or. For example, if you wish to check if a computation performs under certain time boundary and iterates at least a given number do:

expect {
  ...
}.to perform_under(6).ms and perform_at_least(10000).ips

3. Configuration

By default the following configuration is used:

RSpec::Benchmark.configure do |config|
  config.run_in_subprocess = false
  config.disable_gc = false
end

3.1. `:disable_gc`

By default all tests are run with GC enabled. We want to measure real performance or Ruby code. However, disabling GC may lead to much quicker test execution. You can change this setting:

RSpec::Benchmark.configure do |config|
  config.disable_gc = true
end

3.2 `:run_in_subprocess`

The perform_under matcher can run all the measurements in the subprocess. This will increase isolation from other processes activity. However, the rspec-rails gem runs all tests in transactions. Unfortunately, when running tests in child process, database connections are used from connection pool and no data can be accessed. This is only a problem when running specs in Rails. Any other Ruby project can run specs using subprocesses. To enable this behaviour do:

RSpec::Benchmark.configure do |config|
  config.run_in_subprocess = true
end

3.3 `:samples`

The perform_under and computational complexity matchers allow to specify how many times to repeat measurements. You configure it globally for all matchers using the :samples option which defaults to 1:

RSpec::Benchmark.configure do |config|
  config.samples = 10
end

3.4 `:format`

The perform_at_least matcher uses the :format option to format the number of iterations when a failure message gets displayed. By default, the :human values is used to make numbers more readable. For example, the 12300 i/s gets turned into 12.3k i/s. If you rather have an exact numbers presented do:

RSpec::Benchmark.configure do |config|
  config.format = :raw
end

4. Filtering

Usually performance tests are best left for CI or occasional runs that do not affect TDD/BDD cycle.

To achieve isolation you can use RSpec filters to exclude performance tests from regular runs. For example, in spec_helper:

RSpec.config do |config|
  config.filter_run_excluding perf: true
end

And then in your example group do:

RSpec.describe ..., :perf do
  ...
end

Then you can run groups or examples tagged with perf:

rspec --tag perf

Another option is to simply isolate the performance specs in separate directory such as spec/performance/... and add custom rake task to run them.

5. Caveats

When writing performance tests things to be mindful are:

The tests may potentially be flaky thus its best to use sensible boundaries:
- too strict boundaries may cause false positives, making tests fail
- too relaxed boundaries may also lead to false positives missing actual performance regressions
Generally performance tests will be slow, but you may try to avoid unnecessarily slow tests by choosing smaller maximum value for sampling

If you have any other observations please share them!

Contributing

Fork it ( https://github.com/piotrmurach/rspec-benchmark/fork )
Create your feature branch (git checkout -b my-new-feature)
Commit your changes (git commit -am 'Add some feature')
Push to the branch (git push origin my-new-feature)
Create a new Pull Request

Code of Conduct

Everyone interacting in the Strings project’s codebases, issue trackers, chat rooms and mailing lists is expected to follow the code of conduct.

piotrmurach/rspec-benchmark

RSpec::Benchmark

Why?

Contents

Installation

1. Usage

1.1 Timing

1.2 Iterations

1.3 Comparison

1.4 Complexity

1.5 Allocation

2. Compounding

3. Configuration

3.1. `:disable_gc`

3.2 `:run_in_subprocess`

3.3 `:samples`

3.4 `:format`

4. Filtering

5. Caveats

Contributing

Code of Conduct

Copyright

piotrmurach/rspec-benchmark

RSpec::Benchmark

Why?

Contents

Installation

1. Usage

1.1 Timing

1.2 Iterations

1.3 Comparison

1.4 Complexity

1.5 Allocation

2. Compounding

3. Configuration

3.1. :disable_gc

3.2 :run_in_subprocess

3.3 :samples

3.4 :format

4. Filtering

5. Caveats

Contributing

Code of Conduct

Copyright

3.1. `:disable_gc`

3.2 `:run_in_subprocess`

3.3 `:samples`

3.4 `:format`