/Industrial-Datalogger-Project

Industrial DataLogger Design files and Firmware Files

Arduino : Industrial Data Logger Designing and Programing

I have designed the course for the following mentioned datalogger on Udemy, that teaches you how to design hardware and do programing for it. You can check the content of course at following link.

https://www.udemy.com/course/arduino-industrial-data-logger-designing-and-programming/?couponCode=LINKEDIN

Content

  • Images of Datalogger
  • Hardware design files and firmware files for Industrial DataLogger.
  • Examples codes used in demos of all the sections of datalogger.
  • hardware descreption section includes descreptions for all the hardware blocks of datalogger.
  • Libraries used in demo code

Introduction

Please check the following links for demostration of Datalogger

  1. Video in this link describes the entire PCB of Industrial Datalogger

https://drive.google.com/open?id=1AglGJTn_O3K_O5rFmPPeSSnq5-zFRN2F

  1. Video in this link gives the demostration of each and every inetrface of Industrial Datalogger

https://drive.google.com/open?id=1-QjOal9vDFr6C30vdyRp-lrAA95-3nSr

Features

  • SMPS (5V)
  • LDO Regulator (3.3v)
  • Relay Driver (2 CH)
  • DC Motor Speed Controller
  • 0-10 V Digital Input (4 CH)
  • 0-10 V Analog Input (4 CH)
  • 4-20 mA Receiver (2 CH)
  • Real Time Clock
  • Bluetooth Low Energy
  • WiFi Module
  • SD Card Module
  • RS232 Interface
  • RS485 Interface
  • 6 Pin ICSP Headers
  • Serial Programming using UART0