NetFPGA-SUME blinking LEDs design
This design was created to help with some programming issues on NetFPGA-SUME board. Our boards are installed in server cluster, that are mounted in a 48U's rack. It blinks the SFP/Ethernet LEDs in two different patterns, so it is easy to check if the boards were programmed by standing behind the rack and watch the LEDs blinking pattern.
The design was tested and synthesized with Vivado 2014.4 and 2015.4. Just do:
$ source /opt/Xilinx/Vivado/2015.4/settings64.sh
$ make
The bitfiles will be saved on bitfiles
directory.