wpaperd

wpaperd is the modern wallpaper daemon for Wayland. It dynamically changes the current wallpaper, either after a certain amount of time or via a command-line interface. It uses OpenGL ES to render the images and have beautiful hardware-accelerated transitions, while being easy on resources.

Notice: wpaperd uses wlr_layer_shell wayland protocol, which is available on all wlroots based compositors (sway, hyprland, ...) and on KDE. Therefore it won't work on GNOME.

Features

Different wallpaper for each display
Pick a wallpaper from a directory
Change the wallpaper after a set time
Multiple sorting methods (random or ordered)
Flexible TOML configuration file
Hot config reloading for all settings
Easy to use command line interface
Hardware-accelerated configurable transitions
Multiple background modes (center, fit, fill)
Easy on resources (low CPU and memory usage)

Getting started

Dependencies

wpaperd is written in Rust and requires a working Cargo installation. It also depends on:

mesa
wayland-client
wayland-egl
rinstall (optional, for installing wpaperd)
libdav1d (optional, for loading avif images)

Build

To install wpaperd, clone the repository and build the project:

$ git clone https://github.com/danyspin97/wpaperd
$ cd wpaperd
$ cargo build --release

Generate the man pages by running scdoc:

$ scdoc < man/wpaperd-output.5.scd > man/wpaperd-output.5

Install

You can install both the daemon (wpaperd) and cli (wpaperctl) using rinstall:

$ rinstall --yes

To run wpaperd, run the daemon:

$ wpaperd

If you want to automatically run it at startup, add this line to your sway configuration (located in $HOME/.config/sway/config):

# Assuming it has been installed in ~/.local/bin/wpaperd
exec ~/.local/bin/wpaperd -d

Or in Hyprland:

exec-once=~/.local/bin/wpaperd -d

Image formats support

wpaperd uses the [image] create to load and display images. Have a look on its documentation for the supported formats.

Note: To enable avif format, build wpaperd with avif feature (requires libdav1d to be installed.

Cycling images

When path is set to a directory, you can cycle the images by running the commands next and previous using wpaperctl:

$ wpaperctl next
$ wpaperctl previous

When sorting is set to ascending and descending, wpaperd will use the wallpaper name to calculate the next wallpaper accordingly. When sorting is set to random, it will store all the wallpapers shown in a queue, so that the commands next and previous can work as intended.

The cycling of images can also be paused/resumed by running the pause and resume commands, or just toggle-pause, using wpaperctl:

$ wpaperctl pause
$ wpaperctl resume
$ wpaperctl toggle-pause

Wallpaper Configuration

The configuration file for wpaperd is located in XDG_CONFIG_HOME/wpaperd/config.toml (which defaults to ~/.config/wpaperd/config.toml). Each section represents a different display and can contain the following keys:

path, path to the image to use as wallpaper or to a directory to pick the wallpaper from
duration, how much time the image should be displayed until it is changed with a new one. It supports a human format for declaring the duration (e.g. 30s or 10m), described here. This is only valid when path points to a directory. (Optional)
sorting, choose the sorting order. Valid options are ascending, descending, and random, with the default being random. This is only valid when path points to a directory. (Optional)
group, assign multiple displays to same group to share the same wallpaper when using random sorting; group must be a number. (Optional)
mode, choose how to display the wallpaper when the size is different than the display resolution:
- fit shows the entire image with black corners covering the empty space left
- fit-border-color works like fit, but fill the empty space with the color of the border of the image; suggested for images that have a solid color in their border
- center centers the image on the screen, leaving out the corners of the image that couldn't fit
- stretch shows the entire image stretching it to fit the entire screen without leaving any black corner, changing the aspect ratio
- tile shows the image multiple times horizontally and vertically to fill the screen
transition-time, how many milliseconds should the transition run. (Optional, 300 by default).
offset, offset the image on the screen, with a value from 0.0 to 1.0. (Optional, 0.0 by default for tile mode and 0.5 for all the other modes)
queue-size, decide how big the queue should be when path is set a directory and sorting is set to random. (Optional, 10 by default)
initial-transition, enable the initial transition at wpaperd startup. (Optional, true by default)

The section default will be used as base for the all the display configuration; the section any will be used for all the displays that are not explictly listed. This allows to have a flexible configuration without repeating any settings. wpaperd will check the configuration at startup and each time it changes and provide help when it is incorrect.

This is the simplest configuration:

[DP-3]
path = "/home/danyspin97/github_octupus.png"

[DP-4]
path = "/home/danyspin97/Wallpapers"
duration = "30m"

This is a more complex configuration:

[default]
duration = "30m"
mode = "center"
sorting = "ascending"

[any]
path = "/home/danyspin97/default_wallpaper.png"

[DP-3]
path = "/home/danyspin97/Wallpapers"

If you're running sway, you can look for the available outputs and their ID by running:

$ swaymsg -t get_outputs

On Hyprland you can run:

$ hyprctl monitors

FAQ

The wallpapers are slow to load: wpaperd uses the image crate to load and decode the image. However, when built in debug mode the loading and decoding time takes from half a second to a couple, even on modern hardware. Try building wpaperd in release mode:

$ cargo build --release

License

wpaperd is licensed under the GPL-3.0+ license.

pjones/wpaperd