Post Processing of ice/ocean tripole to regular lat lon Three steps: 1) Generate the tripole fixed grid containing all stagger locations and their vertices. Use gen_fixgrid.F90. This creates grid tripole.mx025.nc 2) Generate the interpolation weights to go from stagger locations to center locations and from center locations to regular lat lon. The unstagger weights can be checked with check_weights.ncl Steps 1 and 2 need be done only once for a given tripole grid 3) Regrid the fields using ocnpost.ncl. One complete ocn file takes about in 188.455 seconds ?? Potential additional fields needed (some derived): (from /scratch3/NCEPDEV/marine/noscrub/Denise.Worthen/EMC_ugcs/post/mom6_regrid/sorc): ! 5. 40=Geometric Vertical velocity (2) ! 6. 124=Momentum flux, u component (2) ! 7. 125=Momentum flux, v component (2) ! 15. 188=Evaporation - Precipitation (2) ! 16. 202=Total downward heat flux at surface (downward is positive) (129) ! 19. 197=Ocean Heat Content (129) ! 20. 194=Tropical Cyclone Heat Potential (129) ! 21. 195=Geometric Depth Below Sea Surface for the 2.5C isotherm (129) ! 22. 195=Geometric Depth Below Sea Surface for the 5C isotherm (129) ! 23. 195=Geometric Depth Below Sea Surface for the 10C isotherm (129) ! 24. 195=Geometric Depth Below Sea Surface for the 15C isotherm (129) ! 25. 195=Geometric Depth Below Sea Surface for the 20C isotherm (129) ! 26. 195=Geometric Depth Below Sea Surface for the 25C isotherm (129) ! 27. 195=Geometric Depth Below Sea Surface for the 28C isotherm (129) ! 32. 122=Sensible Heat (2) ! 33. 121=Latent Heat (2) ! 34. 111=Net surface Downward Short Wave flux (2) ! 35. 112=Net surface Downward Long Wave flux (2) ! 36. 59=Precipitation (2) ! 37. 57=Evaporation (2)