PLASTIC PARTS:
Plastic parts are released under the same license as the original author.
Refer to www.plastibot.com/credits for credits/attributions as well as license for each part.
Print the following quantities of the plastic parts. The Gcode files were sliced using settings tailored to the Plastibot Mendel Printer. If you have a different printer you will have to slice your own files. Use 0.25mm layer tickness and 25% infill. The Y-LM8UU holder and the X-Carriage-LM8UU-Holder requires to add a lip of 2mm to ensure the part won't come loose half print.
1x X-End Motor 1x X-End Idler 1x X-Carriage-Platform 1x X-Carriage-Bracket 2x X-Carriage-LM8UU-Holder 1x Herringbone Big Gear 1x Herringbone Small Gear 1x Extruder (Body, idler, spacer, axle) 4x Y-LM8UU Holder 2x Y-Belt Clamp sets (channel, clamp and socket) 2x endstop holder 2x Fan Holder 2x Spool Bushing
LASER CUT PARTS:
The Laser cut Frame is released under Creative Commons - Non Commercial Use License.
Laser cut out of 3/16" thick birch plywood. The bed plate needs to be laser cut out of MDF 3/8" thick.
ASSEMBLY INSTRUCTIONS
Assembly instructions can be found at:
www.plastibot.com/assembly-instructions
Remaining parts (vitamins) to build the printer can be purchased at:
www.plastibot.com/store
For support please contact us at support@plastibot.com
Have fun !!!
The Plastibot Team.