plinkysynth/plinky_public

Issues

• Making small incremental changes in the pattern start step is impossible

  #59 opened 13 days ago by RJ-Eckie
  0

• Device hangs after canceling erasing new sample

  #58 opened 14 days ago by RJ-Eckie
  0

• Note names are not displayed below C0

  #54 opened 25 days ago by RJ-Eckie
  0

• Midi velocity / midi pressure ratio need a dedicated parameter

  #56 opened 25 days ago by RJ-Eckie
  0

• Bottom octave range is too low

  #53 opened 25 days ago by RJ-Eckie
  0

• Midi notes get dropped when multiple come in (almost) simultaneously

  #48 opened 2 months ago by RJ-Eckie
  0

• Voice volume indicators on the oled stay high after being released from a latch

  #45 opened a month ago by RJ-Eckie
  1

• Mix width is not documented

  #49 opened 2 months ago by RJ-Eckie
  0

• Latched notes are muted while shift pads are pressed

  #44 opened 2 months ago by RJ-Eckie
  0

• FW 09z - Plinky does not switch back to internal clock

  #5 opened 2 months ago by makingsoundmachines
  1

• Gate length impacts live playing

  #17 opened 2 months ago by xxv
  1

• Sequencer issue

  #16 opened 2 months ago by xxv
  3

• Latch should be disabled during step record

  #39 opened 2 months ago by RJ-Eckie
  0

• When in step-sequence mode, after previewing a step, sequencer moves a step

  #34 opened 2 months ago by RJ-Eckie
  0

• Hanging notes when playing over hardware midi with clock running

  #23 opened 3 months ago by RJ-Eckie
  0

• Looking for the BOM to upload to PCBWay

  #22 opened 8 months ago by philippeowagner
  0

• MIDI in tape-sample mode should not rotate voices

  #18 opened a year ago by yrn1
  0

• Plinky Expander USB does not power plinky +12/-12 rails

  #15 opened a year ago by cctvfm
  0

• P_ARPONOFF not being set from MIDI CC input

  #1 opened a year ago by okyeron
  1

• Mainboard and panels links

  #12 opened a year ago by Digilogue
  7

• archive download link

  #11 opened a year ago by Digilogue
  1

• spec of the front LEDs?

  #2 opened 2 years ago by KeLaiFu
  3