polarfire-soc/polarfire-soc-discovery-kit-reference-design

No eth0

AndrewCapon opened this issue · 4 comments

AndrewCapon commented

Hi Guys,

Should ethernet be enabled?

I do not see an eth0:

root@mpfs-disco-kit:~# ifconfig
lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
        inet 127.0.0.1  netmask 255.0.0.0
        inet6 ::1  prefixlen 128  scopeid 0x10<host>
        loop  txqueuelen 1000  (Local Loopback)
        RX packets 89  bytes 7682 (7.5 KiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 89  bytes 7682 (7.5 KiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

Thanks

Andy

hughbreslin commented

Hi Andy,

sorry for the delayed response - which Linux image did you grab? Can you please try the one included in the Yocto 2024.02.1 release

AndrewCapon commented

Hi @hughbreslin,

I just built my own with it enabled the end.

I had tried both the images available at the time, one being the one you linked, neither had eth0:

https://github.com/polarfire-soc/meta-polarfire-soc-yocto-bsp/releases/tag/v2024.02.1

https://github.com/polarfire-soc/polarfire-soc-discovery-kit-reference-design/releases/tag/2024.04