pololu/vl53l0x-arduino

Issues

• Reboot loop when I2C Bus is not in a good state

  #50 opened 4 years ago by hsaturn
  10

• Getting below compilation errors when try to run examples

  #56 opened 3 years ago by ravigunasekara
  1

• debugPrint.c error in atmega2560

  #54 opened 3 years ago by FranciscoRibeiro29
  1

• float value in readRangeContinuousMillimeters

  #55 opened 3 years ago by rorkyendo
  1

• Calibration

  #14 opened 7 years ago by mochetts
  4

• i2c freezes

  #53 opened 3 years ago by DjamikTea
  1

• VL53L0X and ESP8226 - Failed to detect ...

  #52 opened 3 years ago by JanChrisKlein
  2

• Range offset

  #51 opened 3 years ago by MassiPi
  1

• Does this library work properly with ESP8266?

  #33 opened 6 years ago by bertrik
  5

• How to use this library with digispark attiny85 board

  #26 opened 6 years ago by PaulKovalov
  3

• VL53l0X multiple interface with atmega 2560 using c libraray

  #38 opened 5 years ago by Aashutosh3804
  1

• Sensors on different I2C channels

  #39 opened 4 years ago by TorbenSchreiter
  2

• Implementation of software i2c

  #47 opened 4 years ago by joesphan
  1

• Making rover move with VL53L0X attached on servo motor (to detect obstacle), IR Sensor to detect line/ path

  #40 opened 4 years ago by Nisha-elsa
  2

• Xtalk issue

  #6 opened 4 years ago by kondoudesu45
  1

• Adafruit library works but this library doesn't works correctly.

  #9 opened 4 years ago by Kagyroy
  25

• Sensor time out after day's of operation

  #44 opened 5 years ago by martin072
  0

• Can't initialize VL53L0/1XV2 sensor on ESP32 (lolin32)

  #43 opened 5 years ago by pcboy
  1

• Fix interrupt and waiting

  #41 opened 5 years ago by badVibes--
  1

• Request for a comment explaining why 1910 was changed to 1320 in setMeasurementTimingBudget

  #19 opened 5 years ago by ssilverman
  1

• Sensor on ESP32

  #11 opened 5 years ago by Corvek
  1

• ESP8266 divide by 0 reboot when device not present

  #34 opened 5 years ago by jstuewe
  1

• Init error

  #16 opened 5 years ago by Apidom
  0

• checkTimeoutExpired() comparison does integer promotion incorrectly

  #22 opened 5 years ago by kevin-pololu
  0

• Using multiple sensors on the same i2c bus

  #1 opened 8 years ago by steinerlein
  23

• Timeout overflow

  #35 opened 6 years ago by macedolfm
  1

• Soft reset sensors

  #30 opened 6 years ago by Lyr3x
  1

• What is the meaning of a reading of 8190?

  #28 opened 6 years ago by fmarzocca
  2

• Measures done using LONG_RANGE mode of 'Single" example seems reach about 60cm, no more

  #29 opened 6 years ago by wrinkle81
  1

• Can't use your board with an I2C OLED display

  #27 opened 6 years ago by fmarzocca
  1

• having trouble booting sensor "failed to boot VL53L0x

  #25 opened 6 years ago by JASimpso
  1

• multiple devices

  #21 opened 7 years ago by dyln
  3

• Reading from pH sensor and dissolved oxygen sensor on same i2c bus

  #23 opened 7 years ago by srkmurd
  1

• Possible missing line that sets SYSTEM_INTERRUPT_CLEAR to 0x00?

  #18 opened 7 years ago by ssilverman
  2

• Multiple devices

  #20 opened 7 years ago by elpedriyo
  1

• Possible wrong register value?

  #17 opened 7 years ago by ssilverman
  3

• How to connect 2 and more sensors?

  #10 opened 7 years ago by ProNikUp
  3

• Multiple Sensors

  #8 opened 7 years ago by habib-ali123
  0

• Is this a type error?

  #4 opened 8 years ago by ScruffR
  1

• Using multiple sensors on the same bus #2

  #2 opened 8 years ago by andreiBots
  0