Monitor and control your eTRV over MQTT. Recently Danfoss has released new TRVs that can be controlled over BLE. This service will allow connect this devices directly to any Smart Home software that supports MQTT.
Application was developed on Raspberry Pi B+
All supported and tested devices:
- Danfoss Eco Bluetooth LE
This software requires at least Python 3.5. All required packages are listed in file requirements.txt.
Because software is under development there is no direct way to install it on system and setup it as system service.
For development just create virtual env and install all requirements.
$ mkdir -p ~/venv/etrv2mqtt
$ python3 -m venv ~/venv/etrv2mqtt
$ source ~/venv/etrv2mqtt/bin/activate
$ pip3 install -r requirements.txtIt is recommended to not start this app as root user. To avoid this you can allow python3 to access to Bluetooth interface
$ sudo apt-get install libcap2-bin
$ sudo setcap 'cap_net_raw,cap_net_admin+eip' `readlink -f \`which python3\``
$ sudo setcap 'cap_net_raw+ep' `readlink -f \`which hcitool\``