probe-rs/hs-probe-firmware

Issues

• Support for ST-LINKV3MINIE hardware

  #47 opened a year ago by eflukx
  10

• Unused enum value seems to be breaking generated binary

  #40 opened 2 years ago by brychanrobot
  11

• DFUed built firmware binary image is not recognized by Windows10

  #43 opened a year ago by shoichi-kojima
  1

• USB HID interface descriptor does not have an interface string

  #23 opened 3 years ago by adamgreig
  0

• Zadig needed to install drivers on Win10

  #25 opened 3 years ago by fnafnio
  3

• Probe cannot connect to the ATSAME51N target

  #29 opened 3 years ago by glaeqen
  1

• Probe not detected by MCUXpresso

  #27 opened 3 years ago by allexoll
  2

• Implement target power control in DAP_Connect/DAP_Disconnect handlers

  #8 opened 4 years ago by Disasm
  19

• Implement DMA buffers aligned to a cache line width

  #22 opened 4 years ago by Disasm
  0

• Implement sensing of power lines

  #15 opened 4 years ago by Disasm
  0

• Implement JTAG support

  #10 opened 4 years ago by Disasm
  1

• Go to sleep to reduce power

  #11 opened 4 years ago by Disasm
  1

• Implement VCP support

  #9 opened 4 years ago by Disasm
  7

• Reset pin cannot be driven until after DAP_Connect

  #4 opened 4 years ago by adamgreig
  0

• Fix get string USB requests

  #2 opened 4 years ago by Disasm
  1