/meta

A Modern C++ Data Sciences Toolkit

Primary LanguageC++MIT LicenseMIT

MeTA: ModErn Text Analysis

Please visit our web page for information and tutorials about MeTA!

Build Status (by branch)

  • master: Build Status
  • develop: Build Status

Outline

Intro

MeTA is a modern C++ data sciences toolkit featuring

  • text tokenization, including deep semantic features like parse trees
  • inverted and forward indexes with compression and various caching strategies
  • a collection of ranking functions for searching the indexes
  • topic models
  • classification algorithms
  • graph algorithms
  • language models
  • CRF implementation (POS-tagging, shallow parsing)
  • wrappers for liblinear and libsvm (including libsvm dataset parsers)
  • UTF8 support for analysis on various languages
  • multithreaded algorithms

Documentation

Doxygen documentation can be found here.

Tutorials

We have walkthroughs for a few different parts of MeTA on the MeTA homepage.

Project setup

Mac OS X Build Guide

Mac OS X 10.6 or higher is required. You may have success with 10.5, but this is not tested.

You will need to have homebrew installed, as well as the Command Line Tools for Xcode (homebrew requires these as well, and it will prompt for them during install, or you can install them with xcode-select --install on recent versions of OS X).

Once you have homebrew installed, run the following commands to get the dependencies for MeTA:

brew update
brew install cmake
brew install icu4c

To get started, run the following commands:

# clone the project
git clone https://github.com/meta-toolkit/meta.git
cd meta/

# set up submodules
git submodule update --init --recursive

# set up a build directory
mkdir build
cd build
cp ../config.toml .

# configure and build the project
CXX=clang++ cmake ../ -DCMAKE_BUILD_TYPE=Release -DICU_ROOT=/usr/local/opt/icu4c
make

You can now test the system by running the following command:

ctest --output-on-failure

If everything passes, congratulations! MeTA seems to be working on your system.

Ubuntu Build Guide

The directions here depend greatly on your installed version of Ubuntu. To check what version you are on, run the following command:

cat /etc/issue

If it reads "Ubuntu 12.04 LTS" or something of that nature, see the Ubuntu 12.04 LTS Build Guide. If it reads "Ubuntu 14.04 LTS" (or 14.10), see the Ubuntu 14.04 LTS Build Guide. If your version is less than 12.04 LTS, your operating system is not supported (even by your vendor) and you should upgrade to at least 12.04 LTS (or 14.04 LTS, if possible).

Ubuntu 12.04 LTS Build Guide

Building on Ubuntu 12.04 LTS requires more work than its more up-to-date 14.04 sister, but it can be done relatively easily. You will, however, need to install a newer C++ compiler from a ppa, and switch to it in order to build meta. We will also need to install a newer CMake version than is natively available.

Start by running the following commands to get the dependencies that we will need for building MeTA.

# this might take a while
sudo apt-get update
sudo apt-get install python-software-properties

# add the ppa that contains an updated g++
sudo add-apt-repository ppa:ubuntu-toolchain-r/test
sudo apt-get update

# this will probably take a while
sudo apt-get install g++ g++-4.8 libicu-dev git make wget

wget http://www.cmake.org/files/v3.1/cmake-3.1.1-Linux-x86_64.sh
sudo sh cmake-3.1.1-Linux-x86_64.sh --prefix=/usr/local

During CMake installation, you should agree to the license and then say "n" to including the subdirectory. You should be able to run the following commands and see the following output:

g++-4.8 --version

should print

g++-4.8 (Ubuntu 4.8.1-2ubuntu1~12.04) 4.8.1
Copyright (C) 2013 Free Software Foundation, Inc.
This is free software; see the source for copying conditions.  There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.

and

/usr/local/bin/cmake --version

should print

cmake version 3.1.1

CMake suite maintained and supported by Kitware (kitware.com/cmake).

Once the dependencies are all installed, you should be ready to build. Run the following commands to get started:

# clone the project
git clone https://github.com/meta-toolkit/meta.git
cd meta/

# set up submodules
git submodule update --init --recursive

# set up a build directory
mkdir build
cd build
cp ../config.toml .

# configure and build the project
CXX=g++-4.8 /usr/local/bin/cmake ../ -DCMAKE_BUILD_TYPE=Release
make

You can now test the system by running the following command:

/usr/local/bin/ctest --output-on-failure

If everything passes, congratulations! MeTA seems to be working on your system.

Ubuntu 14.04 LTS Build Guide

Ubuntu 14.04 has a recent enough GCC for building MeTA, but we'll need to add a ppa for a more recent version of CMake.

Start by running the following commands to install the dependencies for MeTA.

# this might take a while
sudo apt-get update
sudo apt-get install software-properties-common

# add the ppa for cmake
sudo add-apt-repository ppa:george-edison55/cmake-3.x
sudo apt-get update

# install dependencies
sudo apt-get install cmake libicu-dev git

Once the dependencies are all installed, you should double check your versions by running the following commands.

g++ --version

should output

g++ (Ubuntu 4.8.2-19ubuntu1) 4.8.2
Copyright (C) 2013 Free Software Foundation, Inc.
This is free software; see the source for copying conditions.  There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.

and

cmake --version

should output

cmake version 3.1.1

CMake suite maintained and supported by Kitware (kitware.com/cmake).

Once the dependencies are all installed, you should be ready to build. Run the following commands to get started:

# clone the project
git clone https://github.com/meta-toolkit/meta.git
cd meta/

# set up submodules
git submodule update --init --recursive

# set up a build directory
mkdir build
cd build
cp ../config.toml .

# configure and build the project
cmake ../ -DCMAKE_BUILD_TYPE=Release
make

You can now test the system by running the following command:

ctest --output-on-failure

If everything passes, congratulations! MeTA seems to be working on your system.

Arch Linux Build Guide

Arch Linux consistently has the most up to date packages due to its rolling release setup, so it's often the easiest platform to get set up on.

To install the dependencies, run the following commands.

sudo pacman -Sy
sudo pacman -S clang cmake git icu libc++ make

Once the dependencies are all installed, you should be ready to build. Run the following commands to get started:

# clone the project
git clone https://github.com/meta-toolkit/meta.git
cd meta/

# set up submodules
git submodule update --init --recursive

# set up a build directory
mkdir build
cd build
cp ../config.toml .

# configure and build the project
CXX=clang++ cmake ../ -DCMAKE_BUILD_TYPE=Release
make

You can now test the system by running the following command:

ctest --output-on-failure

If everything passes, congratulations! MeTA seems to be working on your system.

EWS/EngrIT Build Guide

If you are on a machine managed by Engineering IT at UIUC, you should follow this guide. These systems have software that is much too old for building MeTA, but EngrIT has been kind enough to package updated versions of research software as modules. The modules provided for GCC and CMake are recent enough to build MeTA, so it is actually mostly straightforward.

To set up your dependencies (you will need to do this every time you log back in to the system), run the following commands:

module load gcc
module load cmake

Once you have done this, double check your versions by running the following commands.

g++ --version

should output

g++ (GCC) 4.8.2
Copyright (C) 2013 Free Software Foundation, Inc.
This is free software; see the source for copying conditions.  There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.

and

cmake --version

should output

cmake version 3.1.1

CMake suite maintained and supported by Kitware (kitware.com/cmake).

If your versions are correct, you should be ready to build. To get started, run the following commands:

# clone the project
git clone https://github.com/meta-toolkit/meta.git
cd meta/

# set up submodules
git submodule update --init --recursive

# set up a build directory
mkdir build
cd build
cp ../config.toml .

# configure and build the project
CXX="/software/gcc-4.8.2/bin/g++" cmake ../ -DCMAKE_BUILD_TYPE=Release
make

You can now test the system by running the following command:

ctest --output-on-failure

If everything passes, congratulations! MeTA seems to be working on your system.

Generic Setup Notes

  • There are rules for clean, tidy, and doc. After you run the cmake command once, you will be able to just run make as usual when you're developing---it'll detect when the CMakeLists.txt file has changed and rebuild Makefiles if it needs to.

  • To compile in debug mode, just replace Release with Debug in the appropriate cmake command for your OS above and rebuild using make after.