Hacking RTL960x
- Hacking V2801F, TWCGPON657 & DFP-34X-2C2 to suite your ISP Fiber
- GPON market is a mess, plus explicit OMCI cause ONU Stick did not work
- 4-port ONU Emulation Table
Stick | SoC | NAND | Mode | 4-port EthUni |
---|---|---|---|---|
VSOL V2801F | RTL9601CI |
8MiB (64Mb) | VEIP, PPTP | YES |
T&W TWCGPON657 | RTL9601CI |
16MiB (128Mb) | VEIP, PPTP | YES, fw: C00R657V2801F |
Ubiquiti UFiber Instant | RTL9601CI |
8MiB (64Mb) | VEIP, PPTP | NO |
ODI DFP-34X-2C2 | RTL9601D |
8MiB (64Mb) | VEIP, PPTP | YES, fw: 220304 & 220414 |
Nokia G-010S-Q | RTL9601CI |
16MiB (128Mb) | ? | ? |
Stick | SoC | NAND | Mode | 4-port EthUni |
---|---|---|---|---|
VSOL V2802RH | RTL9601D |
4MiB (32Mb) | ? | NO |
Stick | Mode | SoC | NAND | Mode | 4-port EthUni |
---|---|---|---|---|---|
ODI DFP-34X-2C2 | E/GPON | ZTE | ? | PPTP, VEIP | NO, NO OMCI EDIT |
Huawei MA5671a | E/GPON | Intel | ? | PPTP, VEIP | NO |
Nokia G-010S-P | E/GPON | Intel | ? | PPTP, VEIP | NO |
Nokia G-010S-A | E/GPON | Intel | ? | PPTP, VEIP | NO |
Stick | Mode | SoC | NAND | Mode | 4-port EthUni |
---|---|---|---|---|---|
Hisense LTF7263-BH+ | 10G EPON/Multi Mode | Realtek | ? | ? | ? |
Hisense LTF7267-BH+ | XGSPON/Multi Mode | Realtek | ? | ? | ? |
Hisense 10G xPON was checked by @YuukiJapanTech, it appear 'might' that support multiple PON mode...
Code | Full name | Meaning |
---|---|---|
PPTP | Physical Path Termination Point | OLT is responsible to provision of VLAN and LAN Port |
VEIP | Virtual Ethernet Interface Point | Allows multiple Ethernet services to be carried over a single PON link |
- Backup
env
,env2
&config
partition Guide by @tdmadam - Setup XPON ONU SFP Stick
flash get
,flash set
- Diagnostic
- Factory Reset
- Switch/Roll back Firmware
O5
no Internet fake ONU Status cause by some OLTOMCI_TM_OPT
stick cause internet speed slow? this look at this, found by @ccy- OMCI MIB INFO check various OMCI, VLAN, OLT
- OMCI VLAN list available VLAN that provided by OLT
- SFU/HGU feature bits RE done by @rajkosto also define 4-port emulation
ignore_conn_uniNode_check
UniG on SFU firmware - Forward Operation
FwdOp
- Wireshark OMCI decoding for Wireshark by @tdmadam
- UART
- Health Status Reports Mikrotik script by @smnrock, sending health report via Telegram Bot
- Slow Upload Speed
- TWCGPON657 × V2801F Firmware
- V2801F Auto Reboot
- Firmware Emulator
- Keygen
List of users has successfully ditch stock ONU!
- @stich86 2.5GbE Internet
- My journey connecting fiber internet to my router
- Hinet users in TW
- @izhamsatria: ~2.5Gbps on TM Unifi before TIME announce 2Gbps plan in Malaysia
- Orange Fiber at 2Gbps (MikroTik 10Gbps CCR2004 router & ONT SFP+) In French
- MagtiCom Fiber in Georgia
- T-Mobile Netherlands replacing Huawei ONT English version
- HSGQ @ Taobao Mall
- Fibershow @ AliExpress Choose XPON
- CureComp Technology Malaysia
- Much cheaper than VSOL V2801F & CarlitoxxPro CPGOS03-0490 v2.0!
- Using latest SoC RTL9601D!
- Support HEX PLOAM Password! Using
220304
Firmware - Support 2.5GbE via HiSGMII or 2500Base-X! See Compatibility, SpeedTest
- Using newer SFP Body with intergrated heatsink See Picture
- Very efficient, just 45°C without fan!
- Automatic/Transparent bridge like VSOL V2801F! Using
220304
Firmware - Support 4-port ONU Emulation
- TWCGPON657 with V2801F Firmware as V2801F substitute
- Opton GP801R Found by @AreYouLoco
- Limited 2.5GbE Support wrong
LAN_SDS_MODE
can lock you out, no auto switch - HEX PLOAM Password require modification from @zry98
- Automatic/Full Transparent
- Support 4-port ONU Emulation
- Modern WebGUI
- Majority fiber vendor support multiple ISP
- ISP provide Triple Play service (Internet, VoIP & IPTV)
- Vendor supply 4-port ONU for each service or ISP
Based on ru-board, xPON Stick with 4-Port Emulation support is limited!
If you using 4-port ONU like Huawei HG8240H5, Nokia G-240G-E and Router connected to ONU LAN 2/3/4, you have limited option, I recommend ODI DFP-34X-2C2 with 220304
or newer firmware.
Here list of xPON Stick on the market that support 4-port ONU Emulation:
xPON Stick | Huawei HG8240H LAN Port | Firmware | |||||
---|---|---|---|---|---|---|---|
Root | 1️⃣ | 2️⃣ | 3️⃣ | 4️⃣ | PVID | ||
Huawei MA5671a | ✔️ | ❌ | ❌ | ❌ | ❌ | ✔️ | OpenWRT |
Nokia G-010S-P | ✔️ | ❌ | ❌ | ❌ | ❌ | ✔️ | OpenWRT |
ODI DFP-34X-2C2 | ✔️ | ✔️ | ❌ | ❌ | ❌ | ❌ | 210702 , 220527 |
ODI DFP-34X-2C2 | ✔️ | ✔️ | ✔️ | ✔️ | ✔️ | ❓ | 220304 , 220414 |
TWCGPON657 | ✔️ | ✔️ | ✔️ | ✔️ | ✔️ | ❌ | C00R657V2801F_V1.9.0-220404.tar |
V-SOL V2801F | ✔️ | ✔️ | ✔️ | ✔️ | ✔️ | ❌ | Stock Firmware |
✔️ Port Emulation Support
❌ Not Supported
Root
mean your ONU is All in One where PPPoE/DHCP ended inside ONU (not bridge/route mode)PVID is VLAN untagging, at router side, WAN connected without VLAN, useful consumer router such as TL-XDR5480 without VLAN support