prusa3d/Prusa-Firmware

Issues

• [BUG] Busy Status on printer

  #4818 opened 2 months ago by Elcar903
  0

• [BUG] MK3SMMU2S "G-code sliced for a different printer type. Continue?"

  #4786 opened 2 months ago by clintonefisher
  7

• [BUG] Some gcodes cause MK3S to reset, give z-axis calibration error, and lose all settings forcing complete re-calibration

  #4714 opened 3 months ago by zaniyah
  18

• [BUG] Z Axis calibration errors during G80 on 3.14 until a Calibration>Z Calibration is run

  #4723 opened 3 months ago by tideline3d
  7

• [BUG] [BUG] "Z-leveling enforced" during mesh bed leveling after upgrading to 3.14.0

  #4775 opened 3 months ago by sinjindog
  7

• [BUG] "Z-leveling enforced" during mesh bed leveling after upgrading to 3.14.0

  #4762 opened 6 months ago by adamdport
  21

• [BUG] Thermal Anomoly errors in 3.14.0

  #4721 opened 7 months ago by ezekeal
  19

• [ENHANCEMENT] Log error messages

  #4796 opened 4 months ago by ssackett
  1

• [BUG] Display remaining time for color change on the LCD screen

  #4734 opened 6 months ago by majedation
  8

• [BUG]

  #4807 opened 3 months ago by arcady-genkin
  3

• [BUG] Printing from USB shows "HO" Message

  #4812 opened 3 months ago by steve1515
  1

• [ENHANCEMENT] Allow user to restart print from a particular layer without executing startup routing.

  #4797 opened 4 months ago by ssackett
  1

• [BUG]Recovery From Power Panic Crashes on the Bed

  #4742 opened 3 months ago by sarf2k4
  10

• [FEATURE REQUEST] Don't cool down nozzle right away on print pause (M601)

  #4716 opened 7 months ago by alexiri
  4

• [QUESTION] Unload Filament Option

  #4804 opened 4 months ago by sabari-1507
  2

• [BUG] FW 3.14.0 on i3 Mk3 - Filament sensor settings reset after every start of printer

  #4808 opened 3 months ago by cordilon
  11

• [BUG] Stop Print doesn't work for prints started with Prusa Link

  #4806 opened 3 months ago by scriptengine
  4

• [BUG] Logitec C920 wont connect with prusa connect

  #4789 opened 4 months ago by Kaylaheart
  3

• [BUG] Mesh bed levelling grid offset

  #4778 opened 5 months ago by Gixy31
  1

• [BUG] FW Crash when SD card is removed

  #4788 opened 4 months ago by sethtroisi
  5

• [ENHANCEMENT] G81 results in Prusa Connect

  #4800 opened 4 months ago by rbronco21
  1

• [BUG] No way to unload filament anymore if ended ups to screen "Changing filament"

  #4803 opened 4 months ago by jupe
  2

• [ENHANCEMENT] Implement a Loading Test All function

  #4802 opened 4 months ago by natn
  1

• [ENHANCEMENT] Export as .3mf

  #4785 opened 4 months ago by JamesMakesit
  1

• [ENHANCEMENT] FINDA stuck in Retry loop, cannot load curved filament

  #4798 opened 4 months ago by hackwin
  0

• [ENHANCEMENT] Allow operator discretion for clearing MMU3 errors.

  #4795 opened 4 months ago by ssackett
  0

• [ENHANCEMENT] Print recovery after fatal error

  #4794 opened 4 months ago by ssackett
  0

• [FEATURE REQUEST] Re-Enable load filament when filament is already loaded

  #4776 opened 5 months ago by Tycho-X
  5

• Extruder Linearity Correction for MK3.5(s)

  #4793 opened 4 months ago by 0uincy
  2

• [BUG] Printer MK3S Revo with MMU2S claim on firmware 3.14.0 rise warning "G-code sliced for different printer"

  #4792 opened 4 months ago by NightSkySK
  1

• [BUG] MMU2S filament load failure with firmware 3.13.x and 3.14.0 (MMU2S fw 3.0.2) - Idler incorrectly positionned

  #4790 opened 4 months ago by cugnonr
  1

• [ENHANCEMENT] Move the Z-axis up after aborting print for better extruder access

  #4791 opened 4 months ago by drygoatair
  4

• [BUG]Power Panic Recovery not working

  #4729 opened 4 months ago by Glennk60
  5

• [BUG] Issue with mid print color change

  #4726 opened 4 months ago by majedation
  9

• [BUG]MMU3 manual filament load fail due improper possition

  #4713 opened 4 months ago by vogll
  4

• [BUG]MK3S doesn't load filament

  #4725 opened 4 months ago by majedation
  5

• [BUG]

  #4787 opened 4 months ago by mi3dke
  4

• [FEATURE REQUEST] After 'Set Ready', go back to main info screen

  #4724 opened 4 months ago by tideline3d
  7

• [BUG] Filament runout not working after upgrading to 3.14.0 (I had to disable/reenable Fil. Runout)

  #4777 opened 5 months ago by adamdport
  3

• [QUESTION]How to enable Print area MBL

  #4711 opened 7 months ago by MrJoki007
  6

• Power panic communication from power supply?

  #4764 opened 5 months ago by loughkb
  5

• [BUG] 3.14.0 When Autoload is turned off, inserting filament only gives you the "Unload" option, while you need "Load" in this case

  #4752 opened 6 months ago by bernieke
  0

• [BUG] Printing starts without filament

  #4719 opened 6 months ago by gnulf2004
  0

• [BUG] Firmware 3.14.0 M601 Resume Print Menu item is missing

  #4757 opened 6 months ago by dg2312
  1

• [ENHANCEMENT]<Toolchange Path Prusa XL>

  #4743 opened 6 months ago by RymdmanSpiff
  2

• [FEATURE REQUEST] Filament change end of layer

  #4740 opened 6 months ago by animoose
  2

• Please add the Prusa Update 3.14.0

  #4730 opened 7 months ago by Investegate
  0

• Unload Filament Command Only Gives 30 Seconds to Comply

  #4718 opened 7 months ago by nathan118118
  2

• No 'Load Filament' menu option when broken filament sensor always 'senses' filament

  #4722 opened 7 months ago by dzuberbier
  4

• [FEATURE REQUEST] Printer lockout

  #4720 opened 7 months ago by nyckidryan
  3