psas/Launch-12

Issues

• Examine RNH port power stats

  #80 opened 9 years ago by jameysharp
  1

• Examine the FC health stats

  #79 opened 9 years ago by jameysharp
  1

• Test

  #81 opened 9 years ago by vosechu
  0

• Investigate apparent data loss during flight

  #77 opened 9 years ago by jameysharp
  1

• Examine the Geiger counter log

  #78 opened 9 years ago by jameysharp
  3

• Tag all the repos with the flight versions

  #73 opened 9 years ago by jameysharp
  1

• Post-process ADIS flight data using calibration log

  #76 opened 9 years ago by jameysharp
  0

• Visualize Venus GPS coordinates

  #74 opened 9 years ago by jameysharp
  2

• Visualize vibration data from flight

  #75 opened 9 years ago by jameysharp
  0

• Add permenant first aid kit to one of the rocket tubs

  #32 opened 9 years ago by dsigma
  1

• Clamp Integrator In PID

  #71 opened 9 years ago by natronics
  2

• picam2 camera Flat Flex Cable issues

  #72 opened 9 years ago by aSmig
  3

• Reimage picam1

  #70 opened 9 years ago by aSmig
  3

• Find or make a case or box for the TeleMetrum Yagi Antenna

  #50 opened 9 years ago by dsigma
  2

• Make a permanent PSAS road sign, if we don't already have one?

  #33 opened 9 years ago by dsigma
  18

• Verify Telemetrum operation

  #61 opened 9 years ago by andrewgreenberg
  5

• Update the Raspicam2 with new gstreamer scripts

  #64 opened 9 years ago by vosechu
  2

• Store video on the NUC as well as on the camera

  #63 opened 9 years ago by vosechu
  3

• Update firmware on old TeleMetrum and TeleDongle

  #52 opened 9 years ago by dsigma
  4

• Fix/Replace the SMA connector on the TeleDongle

  #43 opened 9 years ago by dsigma
  1

• Add 100nF cap to RESET_N line on RNH

  #66 opened 9 years ago by andrewgreenberg
  9

• Add the mile-marker number to site driving directions

  #34 opened 9 years ago by dsigma
  1

• Repack line cutters

  #67 opened 9 years ago by dsigma
  1

• Repack NSR

  #68 opened 9 years ago by dsigma
  1

• Redesign method for carrying rocket (recovery/setup)

  #49 opened 9 years ago by LateralGs
  13

• Replace nylon red cord on tower with Kevlar

  #39 opened 9 years ago by dsigma
  1

• Get Venus IC to start more reliably by adding larger cap to reset line

  #69 opened 9 years ago by andrewgreenberg
  1

• Launch Tower: Weather Station

  #41 opened 9 years ago by ThirteenFish
  2

• Launch Tower: Rotating Beacon and Klaxon

  #42 opened 9 years ago by ThirteenFish
  1

• Redesign rocket carrier/stand

  #48 opened 9 years ago by LateralGs
  9

• VMS Trailer

  #58 opened 9 years ago by dsigma
  1

• Cleanup machining on launch rail buttons

  #46 opened 9 years ago by dsigma
  6

• Order more J-Tek E-Matches

  #57 opened 9 years ago by dsigma
  4

• Investigate GPS jamming issue

  #60 opened 9 years ago by andrewgreenberg
  1

• Lightweight antenna tower for Launch Control

  #36 opened 9 years ago by dsigma
  2

• Get video streaming working over the tm3k instead of the umbilical

  #62 opened 9 years ago by vosechu
  1

• Replace plug on TM3K USB to BBB coaxial power cable

  #65 opened 9 years ago by andrewgreenberg
  2

• Machine more nylon line cutter stop blocks

  #45 opened 9 years ago by dsigma
  2

• Tools and parts holder for rocket stand

  #53 opened 9 years ago by LateralGs
  2

• Clean and scrub the launch rail

  #47 opened 9 years ago by dsigma
  0

• Add a semi-permanent link to the tower base plate.

  #54 opened 9 years ago by dsigma
  1

• Clean and paint the fin-can motor retainer steel piece. It's starting to rust.

  #55 opened 9 years ago by dsigma
  1

• Purchase Motor

  #59 opened 9 years ago by natronics
  1

• Get Permanent Trailer

  #40 opened 10 years ago by dsigma
  4

• Fully clean grease and debris out of motor casing

  #44 opened 10 years ago by dsigma
  1

• Debug Rocket Ready

  #51 opened 10 years ago by ThirteenFish
  1

• Make a ring to aid in motor assmebly

  #37 opened 10 years ago by dsigma
  1

• Order permanent hanging scale for rocket tubs

  #56 opened 10 years ago by dsigma
  1

• Create multiple git repos for airframe CAD drawings

  #38 opened 10 years ago by dsigma
  2

• Reassembly Teledongle Yagi Antenna

  #35 opened 10 years ago by dsigma
  1