psas/gps-rf-board

Issues

• Is this project still active?

  #7 opened 4 years ago by spit4520
  1

• Add modwire for SPI1_NSS

  #6 opened 10 years ago by kwilsonpdx
  1

• Replace C38 with correct capacitor (100uF)

  #5 opened 10 years ago by kwilsonpdx
  0

• MAX2769 SPI interface not connected to GPIO with access to SPI module on STM32f4xx

  #4 opened 11 years ago by kwilsonpdx
  5

• Default Ethernet chip should be the KSZ8081RNA

  #3 opened 11 years ago by andrewgreenberg
  0

• Change out RGB LED for one that exists on v3

  #2 opened 11 years ago by andrewgreenberg
  0

• Low power/Low freq (32KHz) xtal to v3

  #1 opened 11 years ago by andrewgreenberg
  0