psas/lv3.0-airframe

Issues

• Replace the Cradle Ring with the Camera Bulkhead

  #29 opened 6 years ago by Joedang
  1

• Perform EM Testing with the Assembled Flight Computer Module

  #32 opened 7 years ago by Joedang
  1

• Side-hole drilling jig

  #24 opened 6 years ago by Joedang
  1

• Finish the cradle mounting rings

  #27 opened 6 years ago by Joedang
  1

• The Cubesat Cradle Doesn't Fit in a Single Module

  #22 opened 6 years ago by Joedang
  1

• Thermal Sensing

  #14 opened 8 years ago by Joedang
  6

• Make a Pretty Diagram of LV3 and its Subsystems

  #28 opened 6 years ago by Joedang
  1

• Layup Experiments

  #11 opened 8 years ago by Joedang
  0

• Mass Measurements

  #21 opened 7 years ago by Joedang
  2

• Research the Relationship Between Surface Roughness and Drag at Trans/Super-sonic Speeds

  #33 opened 7 years ago by Joedang
  0

• LV3 Spec Sheet

  #19 opened 7 years ago by Joedang
  1

• Update the Fin Can Layup Procedure

  #31 opened 7 years ago by Joedang
  0

• Finish the Nosecone Layup Procedure

  #30 opened 7 years ago by Joedang
  0

• Camera ring

  #25 opened 7 years ago by Joedang
  1

• Order motor

  #26 opened 7 years ago by Joedang
  1

• Sanding

  #9 opened 7 years ago by Joedang
  6

• Umbilical + switch ring

  #23 opened 7 years ago by Joedang
  2

• Phase Change Plate

  #13 opened 8 years ago by Joedang
  0

• Fasteners for CAD Models

  #17 opened 8 years ago by Joedang
  1

• Nose Cone Hardware

  #8 opened 7 years ago by Joedang
  2

• Achieving suborbital with solids.

  #20 opened 7 years ago by rgregoryclark
  1

• Missing Fillet in Spider Drawing

  #18 opened 8 years ago by Joedang
  1

• How do the Radial Mounting Holes for the Cubesat Cradle Lid Work?

  #15 opened 8 years ago by Joedang
  8

• Machining fin jigs

  #5 opened 8 years ago by Joedang
  4

• Fin Frame Machining

  #6 opened 8 years ago by Joedang
  1

• Fixing and Machining the Rail Sled

  #7 opened 8 years ago by Joedang
  3

• Sled Jig Machining

  #16 opened 8 years ago by Joedang
  3

• Resurrecting the 2.3 Nose Mold

  #12 opened 8 years ago by Joedang
  1

• We lost the LV3 assembly?

  #10 opened 8 years ago by 7deeptide
  1

• Fin redesign

  #4 opened 8 years ago by Joedang
  1

• Fin brackets have incorrect dimensions

  #2 opened 8 years ago by jalouke
  0

• Rail buttons

  #1 opened 10 years ago by jalouke
  3