psas/stm32

Issues

• Is this project active?

  #62 opened 8 years ago by Joedang
  0

• All devices: Error message socket

  #29 opened 9 years ago by ThirteenFish
  1

• Possible clock glitch (ETH): MCO1 enabled before final clock selection in hal_lld.c

  #61 opened 9 years ago by kwilsonpdx
  0

• GPS board doesn't start when cold

  #60 opened 9 years ago by ThirteenFish
  2

• Investigate I2C Crashes

  #58 opened 10 years ago by ThirteenFish
  1

• BQ24725 Configuration

  #59 opened 10 years ago by ThirteenFish
  0

• Utils led: Add polarity to led struct

  #57 opened 10 years ago by ThirteenFish
  0

• Roll-servo: watchdog rollservo messages

  #55 opened 10 years ago by ThirteenFish
  1

• RNH: watchdog

  #56 opened 10 years ago by ThirteenFish
  0

• Flight-servo: Respond with an error message when it could not set the exact pwm value

  #33 opened 10 years ago by ThirteenFish
  1

• Record Important Commands To FC

  #41 opened 10 years ago by natronics
  3

• Flight-servo: disable servo safety checking when built for flight.

  #34 opened 10 years ago by ThirteenFish
  1

• Low Pass Filter Servo Control

  #15 opened 10 years ago by natronics
  5

• Rocket Net Hub: Launch detect lacks specifications

  #13 opened 10 years ago by kwilsonpdx
  2

• RNH: Watchdog RRDY

  #54 opened 10 years ago by ThirteenFish
  0

• Change RCI port to Telnet default port 23

  #52 opened 10 years ago by wicker
  1

• Disable interrupts during ADIS self test function

  #53 opened 10 years ago by wicker
  0

• Flight-Servo: Feature Complete

  #49 opened 10 years ago by ThirteenFish
  0

• Flight-IMU: Feature Complete

  #50 opened 10 years ago by ThirteenFish
  0

• Flight-RNH: Feature complete

  #51 opened 10 years ago by ThirteenFish
  0

• Flight-GPS: feature complete

  #48 opened 10 years ago by ThirteenFish
  1

• RNH umbilical link light launch detect

  #28 opened 10 years ago by ThirteenFish
  3

• Switch to ASCII only Commands in RCI

  #42 opened 10 years ago by natronics
  1

• RNH arm/unarm/safe meta-state

  #31 opened 10 years ago by ThirteenFish
  0

• Rocket Commands Should be TCP

  #39 opened 10 years ago by natronics
  1

• Handle or report all error codes returned from sensors

  #14 opened 11 years ago by ThirteenFish
  1

• RNH sleep state

  #32 opened 11 years ago by ThirteenFish
  1

• Aquire battery information from the BQ3060

  #24 opened 11 years ago by ThirteenFish
  5

• Add htonl macro

  #36 opened 11 years ago by natronics
  2

• Sequence Numbers On Outgoing IMU Data

  #16 opened 11 years ago by natronics
  1

• Implement PSAS data type seqence counters

  #35 opened 11 years ago by ThirteenFish
  2

• GPS Board PHY Needs Clock

  #47 opened 11 years ago by kwilsonpdx
  1

• Remove servo board launch detect

  #20 opened 11 years ago by ThirteenFish
  2

• KSZ8999 QoS (Ethernet Switch)

  #25 opened 11 years ago by ThirteenFish
  0

• Configure the BQ3060 (battery gas gauge)

  #23 opened 11 years ago by ThirteenFish
  1

• Integrate psas_packet into the toolchain and projects

  #19 opened 11 years ago by ThirteenFish
  0

• Code Review Issue: gcc (cortex-m4) flags review

  #17 opened 11 years ago by kwilsonpdx
  4

• Change build to turn ON FPU by default

  #18 opened 11 years ago by kwilsonpdx
  4

• BQ24725 charging current.

  #22 opened 11 years ago by ThirteenFish
  1

• Use Asserts, But Have Them Turned Off For Flight

  #38 opened 11 years ago by natronics
  1

• Non-blocking chprintf

  #46 opened 11 years ago by ThirteenFish
  1

• Create assert macro like normal C assert

  #45 opened 11 years ago by ThirteenFish
  1

• Platform independent LED specification

  #43 opened 11 years ago by ThirteenFish
  1

• Not checking return value >=0 from get_udp_socket(...) from util_sockets.c

  #44 opened 11 years ago by kwilsonpdx
  0

• RNH port current measurements via ADC (MAX4734)

  #21 opened 11 years ago by ThirteenFish
  1

• Add Back From Address Data In RCI

  #40 opened 11 years ago by natronics
  1

• Investigate `make_addr` with anonymous struct

  #37 opened 11 years ago by natronics
  1

• RNH implement master clock

  #30 opened 11 years ago by ThirteenFish
  0

• RNH command to read port states

  #27 opened 11 years ago by ThirteenFish
  1

• Fix port on/off command bits

  #26 opened 11 years ago by ThirteenFish
  1