microservices-architecture

An opensource repository for all my learnings regarding microservices.

Note: All installation and setups here are done on my Debian machine. For installation of tools on other OS you might want to check their documentations for the instructions.

Pre-requisites

Prior knowledge to the ff:
- Virtual Machines
- Docker
- Basic Networking
- Application Development
Change to superuser access, but please be aware of every command you run

$    sudo su

Guts

Note : You can follow this guide without those prior knowledge but on each step or phase you have to do your research on that specific topic and this guide would just help you to narrow down the learning curve.

Technology Used

Virtualbox
Docker
- Docker Compose
- Docker Swarm
- Docker Machine
- Docker Plugin - local-persist
Portainer
NodeJS
Jenkins
- BlueOcean
ELK Stack
- Elasticsearch
  - Filebeat
  - Metricbeat
  - Heartbeat
- Logstash
- Kibana
  - Application Performance Monitoring (APM)
Metabase
NGINX

Dependency Installation

Note : You can browse the script file, dependency-installation.sh to view steps for each installation.

A script was already made which includes installation for the ff:
- Virtualbox
- Docker
- Docker Compose
- Docker Machine
- Docker Plugin - local-persist

$   chmod +x dependency-installation.sh \
    && ./dependency-installation.sh

Some take notes before actual setup

You can use this guide on servers other than Debian but make sure you know what you are doing.
For naming docker networks, swarms, etc. please do not use dashed lines (-), use underscores instead (_). A sample case for this is when you replicate containers, the IP for those containers might vary and for you to communicate to those container regardless of their IP is that you can use the service name of the container (stack name + service name on compose file) as host name but once you use a dashed line on those, parsing the host name would give an error. You can see implementation along the way.
Never use localhost use 127.0.0.1 instead.
Its always better to deploy databases on different swarm node that is preferrably on a different server as well.
For NGINX timeouts, it is advisable to place the configurations for timeouts on the conf.d folder under a single file for single responsibility.

Docker Swarm Setup

Initialize docker swarm

Note : If there are more than one IP address present on your server, append --advertise-addr <ip-addr> as arg on swarm init command and replace <ip-addr> with the IP address you want to use as seen below.

$   docker swarm init
$   docker swarm init --advertise-addr <ip-addr>

Check if swarm was created

$   docker node ls

Optional : If you want to deploy lets say the database stack to another server different from the server used by the microservices stack use docker swarm join command, for more info check here.

Docker Network Setup

Create network for microservices

Note : On the compose file of services that need to see each other, add the created network name and add external property to it that is set to true. See compose files on the repo for example.

$   NETWORK_NAME=services_network \
    && docker network create --driver=overlay ${NETWORK_NAME}

Check if network was created

$   docker network ls

Portainer Setup

Deploy Portainer monitoring tool for docker

$   TOOLS_SETUP_DIR=tools \
    STACK_NAME=services_tools \
    && docker stack deploy -c ./${TOOLS_SETUP_DIR}/docker-compose.portainer.yaml ${STACK_NAME}

Check if Portainer is deployed, might take some time

$   docker service ls

Once deployed access Portainer on http://127.0.0.1:9000 and setup whatever you need to. You could also check Portainer's Documentation for further guide.

Elasticsearch, Logstash, Kibana (ELK) Stack Setup

Change ELASTIC_PASSWORD to your desired password for Elasticsearch, or just leave it as is for default.
Deploy centralized logging using ELK stack

Note : If elasticsearch does not start you might need to run this sysctl -w vm.max_map_count=262144 or if you want that setting to persist on reboot, open /etc/sysctl.conf then add vm.max_map_count=262144 finally run service sysctl restart to apply changes.

$   TOOLS_SETUP_DIR=tools \
    STACK_NAME=services_tools \
    && docker stack deploy -c ./${TOOLS_SETUP_DIR}/docker-compose.elk.yaml ${STACK_NAME}

Check if ELK stack is deployed, might take some time

$   docker service ls

Once deployed access ELK stack on http://127.0.0.1:5601 which will be your Kibana's URL and setup whatever you need to.

Heartbeat Uptime Monitoring Setup

Install Heartbeat

$   curl -L -O https://artifacts.elastic.co/downloads/beats/heartbeat/heartbeat-6.7.0-amd64.deb \
    && dpkg -i heartbeat-6.7.0-amd64.deb \
    && rm heartbeat-6.7.0-amd64.deb

Modify Heartbeat config on /etc/heartbeat/heartbeat.yml

output.elasticsearch:
  hosts: ["127.0.0.1:9200"]
  username: "elastic"
  password: "changeme"
setup.kibana:
  host: "127.0.0.1:5601"

Add service URLs for heartbeat to monitor on /etc/heartbeat/heartbeat.yml

heartbeat.monitors:
- type: http
  urls: ["<http://127.0.0.1:9000>"]
  schedule: "@every 10s"

Start Heartbeat service

$   heartbeat setup
$   service heartbeat-elastic start

Check if Heartbeat is working on Kibana's Uptime Monitoring

Metricbeat Setup

Install Metricbeat

$   curl -L -O https://artifacts.elastic.co/downloads/beats/metricbeat/metricbeat-6.7.0-amd64.deb \
    && dpkg -i metricbeat-6.7.0-amd64.deb \
    && rm metricbeat-6.7.0-amd64.deb

Modify Metricbeat config on /etc/metricbeat/metricbeat.yml

output.elasticsearch:
  hosts: ["127.0.0.1:9200"]
  username: "elastic"
  password: "changeme"
setup.kibana:
  host: "127.0.0.1:5601"

Start Metricbeat service

$   metricbeat setup
$   service metricbeat start

For installing Metricbeat modules check for instructions on Kibana's Tutorial Directory

Filebeat Setup

Install Filebeat

$   curl -L -O https://artifacts.elastic.co/downloads/beats/filebeat/filebeat-6.7.0-amd64.deb \
    && dpkg -i filebeat-6.7.0-amd64.deb \
    && rm filebeat-6.7.0-amd64.deb

Modify Filebeat config on /etc/filebeat/filebeat.yml, this is to enable catching of logs from Docker containers

filebeat.inputs:
- type: docker
  containers:
    ids: 
      - "*"
output.elasticsearch:
  hosts: ["127.0.0.1:9200"]
  username: "elastic"
  password: "changeme"
setup.kibana:
  host: "127.0.0.1:5601"

Start Filebeat service

$   filebeat setup
$   service filebeat start

Check if logs are working on Kibana's Logs
For installing Filebeat modules check for instructions on Kibana's Tutorial Directory

Application Performance Monitoring (APM) Setup

Install APM server

$   curl -L -O https://artifacts.elastic.co/downloads/apm-server/apm-server-6.7.0-amd64.deb \
    && dpkg -i apm-server-6.7.0-amd64.deb \
    && rm apm-server-6.7.0-amd64.deb

Modify APM config on /etc/apm-server/apm-server.yml

output.elasticsearch:
  hosts: ["127.0.0.1:9200"]
  username: "elastic"
  password: "changeme"

Start APM server

$   service apm-server start

For setting up APM node on your app please follow instructions on Kibana's APM Tutorial.

NodeJS Setup

Install NodeJS and NPM to start developing applications, you can replace NODE_VER with the version you want.

$   NODE_VER=12.x \
    curl -sL https://deb.nodesource.com/setup_${NODE_VER} \
    apt install -y nodejs npm build-essential

Metabase Setup

Create persistent volumes.

Note : Dont remove this volume on production to avoid data loss, the data would persist but still.

$   docker volume create -d local-persist -o mountpoint=/var/lib/metabase/data --name=metabase_data

Build custom image for Metabase, to add support for FirebirdSQL.

$   METABASE_SETUP_DIR=tools/metabase \
    OWNER=tools \
    && docker build -t ${OWNER}/metabase:latest ./${METABASE_SETUP_DIR}/.

Deploy Metabase.

$   TOOLS_SETUP_DIR=tools \
    STACK_NAME=services_tools \
    && docker stack deploy -c ./${TOOLS_SETUP_DIR}/docker-compose.metabase.yaml ${STACK_NAME}

Jenkins Setup

Deploy Jenkins

Note : A password will be shown on jenkins container logs, use it for first time setup on jenkins. You can also save it on other location for later use.

$   TOOLS_SETUP_DIR=tools \
	  STACK_NAME=services_tools \
	  && docker stack deploy -c ./${TOOLS_SETUP_DIR}/docker-compose.jenkins.yaml ${STACK_NAME}

Check if Jenkins is deployed, might take some time

$   docker service ls

Once deployed access Jenkins on http://127.0.0.1:8080, input the password shown on the container logs mentioned on previous step. Setup Jenkins accordingly and proceed to login.

Setting Up a Bitbucket Pipeline (Optional Guide)

On the dashboard navigate to Manage Jenkins>Manage Plugins then click on Available tab and search for Bitbucket Push and Pull Request Plugin and install it.
On your bitbucket repository nagivate to Settings>Webhooks then click Add webhook, set title to Jenkins and URL to http://YOUR_JENKINS_URL/bitbucket-hook/ then adjust triggers to your likings, the default is Repository push.
After setting up on bitbucket repositry get back to jenkins and on dashboard navigate to New Item, set item name to REPOSITORY_NAME and click Pipeline then save. A configuration page would appear after. On the Build Triggers tab tick Build with BitBucket Push and Pull Request Plugin then add triggers similar to the triggers you set on the repository settings from the previous step. On the Pipeline tab set definition to Pipeline script from SCM and a configuration would appear below. Set SCM to Git, then on repository URL put the URL for cloning your repository. On the credentials select if you already have, if not click Add>Jenkins set values for username, password, ID and description field and click Add on the bottom, this would appear on the selection right after. On the branches to build set branch specifier to origin/master. Finally click Save.
Navigate Back to Dashboard, you will see your newly created pipeline.
Navigate to Open Blue Ocean, a modernized UI for jenkins would appear which contains all the pipelines created. Click on your newly created pipeline from the list, then click Run, this is required to initialized connection between bitbucket and jenkins through the webhook.
Make sure you have a Jenkinsfile on the repository you used, this would be the recipe for the different stages of the pipeline.

NGINX Setup

On your host machine install and run NGINX using the following command.

$   apt install nginx \
    && service nginx start

Check if NGINX is running.

$   service nginx status

To setup NGINX as reverse proxy for your NodeJS application, create <app-name> file under /etc/nginx/sites-available.

$   touch /etc/nginx/sites-available/<app-name>

Open the created file and add the following configuration.

server {
  listen 80;
  listen 443 ssl;
  server_name <app-domain>;
  
  ssl_certificate  /etc/nginx/ssl/<app-name>.crt
  ssl_certificate_key /etc/nginx/ssl/<app-name>.key

  location / {
    proxy_pass http://127.0.0.1:<app-port>;
    proxy_http_version 1.1;
    proxy_set_header X-Forwarded-For $remote_addr;
    proxy_set_header Upgrade $http_upgrade;
    proxy_set_header Connection 'upgrade';
    proxy_set_header Host $http_host;
    proxy_cache_bypass $http_upgrade;
  }
}

Link sites-available to sites-enabled.

$   ln -s /etc/nginx/sites-available/<app-name> /etc/nginx/sites-enabled/

Restart NGINX to apply configuration.

$   service nginx restart

About

Contributing

Pull requests and stars are always welcome. For bugs and feature requests, please create an issue.

Contributors

Author

Eagan Martin

pupupulp/microservices-architecture

microservices-architecture

Pre-requisites

Technology Used

Dependency Installation

Some take notes before actual setup

Docker Swarm Setup

Docker Network Setup

Portainer Setup

Elasticsearch, Logstash, Kibana (ELK) Stack Setup

Heartbeat Uptime Monitoring Setup

Metricbeat Setup

Filebeat Setup

Application Performance Monitoring (APM) Setup

NodeJS Setup

Metabase Setup

Jenkins Setup

Setting Up a Bitbucket Pipeline (Optional Guide)

NGINX Setup

About

Contributing

Contributors

Author

License