Made using OpenCore Install Guide.
Component | Hardware |
---|---|
CPU | Intel Core i3 10105 |
Motherboard | Gigabyte H510M H V2 |
Chipset | H470 |
Memory | 2x 8GB DDR4 2666Mhz |
Storage | 256GB NVME M.2 SSD |
iGPU | Intel UHD 630 (output) |
dGPU | Nvidia GTX 1660 Super (disabled) |
Ethernet | Realtek PCIe GbE Family Controller |
Audio | Realtek ALC897 Audio Controller |
- Everything is working perfectly, after a lot of time, stress and testing, as with all hackintoshes.
- You need to manually fill in the PlatformInfo values as I can't share my working serial, follow this guide and iServices should work fine. Use ProperTree to edit the config.plist file.
- You may need to change certain values, quirks, patches and kexts. Always use ProperTree to make sure your config.plist is matching what you have on your EFI folder.
- If you have more than 1 NVME SSD installed, the macOS installer won't boot. I had to manually remove the one I use for Windows for the installation process, after it's installed it works fine.
- If you don't have a incompatible dGPU or plan to use your compatible dGPU, remove -wenoegpu from your boot-args.
- If you are installing macOS, I suggest you leave the Misc -> Debug values and boot-args as it is, as it will help you with troubleshooting.
- When you have macOS fully installed and working, I suggest you remove -igfxvesa from your boot-args to enable full acceleration on your iGPU. Also follow the Post-Install Guide to disable debugging properties and verbose boot.