/pycom-firmware-updater

Mac

Installation

  1. Download the FwUpdater-mac.pkg from Releases page.
  2. Run the downloaded .pkg file.
  3. If you already have the old version of pycom-firmware-updater just accept all alerts.

Windows

Installation

  1. Download the FwUpdater-windows.exe from Releases page.
  2. Run the downloaded .exe file.

Ubuntu

Installation from archive

  1. Download the FwUpdater-debian.tar.gz from Releases page.
  2. Extract archive to some directory.
  3. Open the terminal.
  4. Run ./create-service.sh {path_to_dir_with_extracted_files}. The path should be absolute(from your /home/ directory).

Snap Installation

  1. sudo snap install pycom-firmware-updater

  2. sudo snap set system experimental.hotplug=true

  3. sudo systemctl restart snapd

  4. type snap interface serial-port. In the output you will see slots section. For example:

    name: serial-port

    summary: allows accessing a specific serial port

    plugs:

    • pycom-firmware-updater

    slots:

    • snapd:expansion3 (allows accessing a specific serial port)

  5. sudo snap connect pycom-firmware-updater:serial-port snapd:expansion3. snapd:expansion3 is the name of the hotplug slot from the command above. If you have some other name paste it instead.

  6. snap connect pycom-firmware-updater:raw-usb

  7. run snap connections pycom-firmware-updater in the 3d(Slot) column on the raw-usb and serial-port lines shouldn't be '-'.

  8. run the app by typing pycom-firmware-updater.

Common Problems

If you have the [Errno 1] Operation not permitted: '/tmp/fwUpdater.pem' error log do next: sudo rm -rf /tmp/snap.pycom-firmware-updater/tmp/fwUpdater.pem