pyroll-project/pyroll-core

Issues

• Provide number of rolls as numerical value

  #254 opened 2 months ago by GRPlan
  0

• Hot and Cold Measure for Initial Profiles

  #224 opened 5 months ago by ChRen95
  2

• Add Algorithm to Calculate interstand Tensions

  #252 opened 3 months ago by ChRen95
  0

• reappearing_cross_section with spreading<1

  #237 opened 3 months ago by RichardPfr
  2

• Make certain that export always provides strain_rate

  #236 opened 3 months ago by GRPlan
  1

• Adjust contour_lines property, so its automatically exported via pyroll-export

  #239 opened 3 months ago by RichardPfr
  0

• Add solve method for velocities

  #246 opened 3 months ago by ChRen95
  0

• Add Default Front and Back Tensions

  #242 opened 3 months ago by ChRen95
  2

• contact_area of Three-Roll Passes

  #238 opened 3 months ago by RichardPfr
  1

• Infinite contact_length Error - contact length calculation

  #240 opened 3 months ago by RichardPfr
  2

• Add default rotation for `box` type profiles and flat grooves and add `flat` profiles as profile type.

  #232 opened 4 months ago by ChRen95
  0

• Rotational Frequency and Surface Velocity of Rolls Wrong When Pass Velocity Given

  #209 opened 4 months ago by axtimhaus
  4

• Bug in `RollPass.entry_angle` and `RollPass.exit_angle`

  #229 opened 4 months ago by ChRen95
  0

• ThreeRollPasses are rotated wrong/ unintuitively

  #221 opened 4 months ago by RichardPfr
  6

• Add `RollPass.OutProfile.velocity` to `root_hooks`

  #227 opened 5 months ago by ChRen95
  0

• Add angle for `Profile` and `DiskElementProfile`

  #198 opened 5 months ago by ChRen95
  0

• Make it possible to provide nominal_diameter in roll definition

  #214 opened 6 months ago by GRPlan
  0

• WIndows 11: PyRoll-run gets stuck in an endless loop due to problems with kaleido package

  #195 opened 6 months ago by GRPlan
  4

• Add Citation File to Repository

  #203 opened 6 months ago by axtimhaus
  0

• `init_solve` method with predefined `in_profile`

  #201 opened 7 months ago by ChRen95
  0

• Add Longitudinal and Latitudinal contact friction.

  #196 opened 7 months ago by ChRen95
  0

• Add contour line and contour angles for profiles

  #193 opened 7 months ago by ChRen95
  0

• Add stress and strain state calculation.

  #160 opened 7 months ago by ChRen95
  1

• cross section filling ratio | filling ratio

  #190 opened 7 months ago by KoosVanPutten
  3

• Add more hook values and implementation to cooling pipe

  #189 opened 8 months ago by ChRen95
  0

• Add ASTM Grain Size class to ´profile´

  #183 opened 8 months ago by ChRen95
  0

• Adjust description of chemical composition to fix TDB files.

  #185 opened 8 months ago by ChRen95
  0

• Add ´append´ and ´prepend´ methods to `PassSequence`

  #184 opened 8 months ago by ChRen95
  0

• Add `RollShadowZone`

  #167 opened 8 months ago by ChRen95
  0

• Add microstructure characteristics to profile

  #179 opened 9 months ago by ChRen95
  0

• Add engine torque to `RollPass`

  #178 opened 9 months ago by ChRen95
  0

• Improve Contur representation by adding more points

  #170 opened 10 months ago by GRPlan
  1

• Fix Bug in test_groove_from_spline

  #174 opened 10 months ago by ChRen95
  0

• Add Support for Plotly in `.plot()` Methods

  #166 opened 10 months ago by axtimhaus
  0

• Revise Definition of Transport Length

  #169 opened 10 months ago by axtimhaus
  2

• Update Equivalent Ripped Groove to match the total volume flux

  #134 opened 10 months ago by ChRen95
  1

• Make certain that strain_rate is always displayed in PassSequence Summary

  #144 opened 10 months ago by GRPlan
  2

• Protocolize Hook Definitions

  #163 opened 10 months ago by axtimhaus
  3

• Add PillarElement Class

  #162 opened 10 months ago by ChRen95
  4

• Bug in Generic_Elongation_Solvers

  #159 opened 10 months ago by ChRen95
  2

• Review of the paper for JOSS

  #158 opened 10 months ago by rboman
  3

• Add roll pass hooks for tension and kinemtic calculations

  #147 opened 10 months ago by ChRen95
  1

• Improve internal naming schemes to work with autocompletion in jupyter notebooks

  #142 opened 10 months ago by GRPlan
  3

• Unify behavior of plastic strain without or with transports

  #151 opened 10 months ago by GRPlan
  2

• Make iterating over stands easier when transports are present in the rollpass

  #152 opened 10 months ago by GRPlan
  0

• Implement velocity calculations inside CoolingPipe

  #133 opened 10 months ago by ChRen95
  1

• Non-Deterministioc Errors Raised by Shapely

  #135 opened 10 months ago by axtimhaus
  5

• Remove - sign at entry angle.

  #139 opened a year ago by ChRen95
  0

• Rename thermal_capacity in heat value calculations to specific heat capacity

  #141 opened a year ago by ChRen95
  0

• Implement Inductive Heating Unit

  #132 opened a year ago by ChRen95
  0