STM32 peripheral mappings for Drone, an Embedded Operating System.
This crate uses CMSIS-SVD files provided by STMicroelectronics to automatically generate Drone register and interrupt bindings. However only the corresponding Reference Manual is the single source of truth. A difference between this crate bindings and the Reference Manual is considered a bug. Fixing such a bug is not a breaking change.
This crate re-exports the contents of [drone_cortexm::map
] module and is a
drop-in replacement for it.
stm32_mcu |
Core name | Reference manual | Available features |
---|---|---|---|
stm32f100 |
ARM® Cortex®-M3 r1p1 | RM0041 | dma gpio spi tim |
stm32f101 |
ARM® Cortex®-M3 r1p1 | RM0008 | dma gpio spi tim |
stm32f102 |
ARM® Cortex®-M3 r1p1 | RM0008 | dma gpio spi tim |
stm32f103 |
ARM® Cortex®-M3 r1p1 | RM0008 | dma gpio spi tim |
stm32f107 |
ARM® Cortex®-M3 r1p1 | RM0008 | dma gpio spi tim |
stm32f303 |
ARM® Cortex®-M4F r0p1 | RM0316 | adc dma exti gpio i2c tim |
stm32f401 |
ARM® Cortex®-M4F r0p1 | RM0368 | adc dma exti gpio i2c spi tim uart |
stm32f405 |
ARM® Cortex®-M4F r0p1 | RM0090 | adc dma exti flash gpio i2c rtc spi tim uart |
stm32f407 |
ARM® Cortex®-M4F r0p1 | RM0090 | adc dma exti flash gpio i2c rtc spi tim uart |
stm32f410 |
ARM® Cortex®-M4F r0p1 | RM0401 | adc dma exti gpio i2c spi tim uart |
stm32f411 |
ARM® Cortex®-M4F r0p1 | RM0383 | adc dma exti gpio i2c spi tim uart |
stm32f412 |
ARM® Cortex®-M4F r0p1 | RM0402 | adc dma exti gpio i2c spi tim uart |
stm32f413 |
ARM® Cortex®-M4F r0p1 | RM0430 | adc dma exti gpio i2c spi tim uart |
stm32f427 |
ARM® Cortex®-M4F r0p1 | RM0090 | adc dma exti flash gpio i2c rtc spi tim uart |
stm32f429 |
ARM® Cortex®-M4F r0p1 | RM0090 | adc dma exti flash gpio i2c rtc spi tim uart |
stm32f446 |
ARM® Cortex®-M4F r0p1 | RM0390 | adc dma exti gpio i2c spi tim uart |
stm32f469 |
ARM® Cortex®-M4F r0p1 | RM0386 | adc dma exti gpio i2c spi tim uart |
stm32l4x1 |
ARM® Cortex®-M4F r0p1 | RM0394 | dma exti gpio i2c rtc spi tim uart |
stm32l4x2 |
ARM® Cortex®-M4F r0p1 | RM0394 | dma exti gpio i2c rtc spi tim uart |
stm32l4x3 |
ARM® Cortex®-M4F r0p1 | RM0394 | dma exti gpio i2c rtc spi tim uart |
stm32l4x5 |
ARM® Cortex®-M4F r0p1 | RM0351 | dma exti gpio i2c rtc spi tim uart |
stm32l4x6 |
ARM® Cortex®-M4F r0p1 | RM0351 | dma exti gpio i2c rtc spi tim uart |
stm32l4r5 |
ARM® Cortex®-M4F r0p1 | RM0432 | adc dma exti gpio i2c rtc spi tim uart |
stm32l4s5 |
ARM® Cortex®-M4F r0p1 | RM0432 | adc dma exti gpio i2c rtc spi tim uart |
stm32l4r7 |
ARM® Cortex®-M4F r0p1 | RM0432 | adc dma exti gpio i2c rtc spi tim uart |
stm32l4s7 |
ARM® Cortex®-M4F r0p1 | RM0432 | adc dma exti gpio i2c rtc spi tim uart |
stm32l4r9 |
ARM® Cortex®-M4F r0p1 | RM0432 | adc dma exti gpio i2c rtc spi tim uart |
stm32l4s9 |
ARM® Cortex®-M4F r0p1 | RM0432 | adc dma exti gpio i2c rtc spi tim uart |
stm32_mcu
config flag should be set at the application level according to
this table.
The API documentation intentionally skips auto-generated [reg
] and [thr
]
bindings. Otherwise it would use several gigabytes of space and would be
very slow to render in a browser. One should refer to the Reference Manual
instead. And to get an idea of what the API looks like on the Drone side,
look at the [drone_cortexm::map
] module documentation.
Add the crate to your Cargo.toml
dependencies:
[dependencies]
drone-stm32-map = { version = "0.14.0", features = [...] }
Add or extend std
feature as follows:
[features]
std = ["drone-stm32-map/std"]
Licensed under either of
- Apache License, Version 2.0 (LICENSE-APACHE or http://www.apache.org/licenses/LICENSE-2.0)
- MIT license (LICENSE-MIT or http://opensource.org/licenses/MIT)
at your option.
Unless you explicitly state otherwise, any contribution intentionally submitted for inclusion in the work by you, as defined in the Apache-2.0 license, shall be dual licensed as above, without any additional terms or conditions.