Pinned Repositories
4_Axis_External_Driver
A Grbl_ESP32 Controller for External Stepper Drivers
6-AXIS-USBCNC-GRBL
This repository is based on https://github.com/usbcnc/grbl which in turn is based on https://github.com/gnea/grbl
Adafruit-Raspberry-Pi-Python-Code
Adafruit library code for Raspberry Pi
Adafruit_NeoPixel
Arduino library for controlling single-wire LED pixels (NeoPixel, WS2812, etc.)
amr_fleet
AMR (Automous Mobile Robots) fleet management system
AR2
6 axis stepper motor robot and control software - Gen2
ArduinoCore-megaavr
Arduino Core for the ATMEGA4809 CPU
Chip
cn5X
cn5X++ is a new 5/6 axis Grbl control panel to implement all the grbl-Mega-5X capabilities.
cnc-arduino-nodejs-electronjs
proyecto router cnc casero con arduino y nodejs, sin drivers A4988 sin usar GRBL.
qiwalker's Repositories
qiwalker/4_Axis_External_Driver
A Grbl_ESP32 Controller for External Stepper Drivers
qiwalker/6-AXIS-USBCNC-GRBL
This repository is based on https://github.com/usbcnc/grbl which in turn is based on https://github.com/gnea/grbl
qiwalker/Adafruit_NeoPixel
Arduino library for controlling single-wire LED pixels (NeoPixel, WS2812, etc.)
qiwalker/amr_fleet
AMR (Automous Mobile Robots) fleet management system
qiwalker/AR2
6 axis stepper motor robot and control software - Gen2
qiwalker/ArduinoCore-megaavr
Arduino Core for the ATMEGA4809 CPU
qiwalker/ESP_WiFiManager
This is an ESP32 / ESP8266 WiFi Connection Manager with fallback web configuration portal. Use this library for configuring ESP32, ESP8266 modules' WiFi, etc. Credentials at runtime. You can also specify static DNS servers, personalized HostName, fixed or random AP WiFi channel. With examples supporting ArduinoJson 6.0.0+ as well as 5.13.5- .
qiwalker/g2
g2core - The Next Generation
qiwalker/GRBL-Advanced
Grbl-Advanced is a no-compromise, high performance, low cost alternative for CNC milling. This version of Grbl runs on a STM32F411 Nucleo Board. Now with backlash compensation!
qiwalker/Grbl-GCode-Sender
A GCode Sender written in C# using WPF and MVVM coding patterns
qiwalker/GRBL-Plotter
A GCode sender (not only for plotters) for up to two GRBL controller. SVG, DXF, HPGL import. 6 axis DRO.
qiwalker/GRBL-STM32-F7XX
qiwalker/grbl_6axis_on_stm32
grbl_6axis_on_stm32
qiwalker/Grbl_Esp32
A port of Grbl CNC Firmware for ESP32
qiwalker/grblHAL
HALified port/branch of grbl 1.1f, mainly for 32bit processors
qiwalker/grblweb
a web based CNC controller for GRBL
qiwalker/linorobot
ROS Compatible ground robots (2WD, 4WD, Ackermann Steering, Mecanum Drive)
qiwalker/map_annotation_tool
RViz plugin to annotate occupancy grid with navigation goals
qiwalker/Marlin
Reprap FW with look ahead. SDcard and LCD support. It works on Gen6, Ultimaker, RAMPS and Sanguinololu
qiwalker/micropython-lib
Core Python libraries ported to MicroPython
qiwalker/NeoPixelBus
Adafruit enhanced NeoPixel support library
qiwalker/node-rpio
Raspberry Pi GPIO library for node.js
qiwalker/OpenCNCPilot
autolevelling gcode-sender for grbl
qiwalker/pecorino-api
Backend controller for sending commands to Smoothieboard
qiwalker/person_navigation
qiwalker/Repetier-Firmware
Firmware for Arduino based RepRap 3D printer.
qiwalker/smoothie-on-re-arm-for-openpnp
This is the Smoothieware config for my PnP build based on OpenPNP. The base hardware is a 32-bit Re-Arm board.
qiwalker/Smoothieware
Modular, opensource, high performance G-code interpreter and CNC controller written in Object-Oriented C++
qiwalker/SmoothieWebInterface
A standard/reference web interface for Smoothieboards, currently written for v1 but ultimately intended for v2
qiwalker/zeken.github.io