/armbian-onecloud

Armbian for onecloud. 玩客云用armbian

armbian-onecloud

README | 中文文档

Has made a PR to the official repository, wait for merging

Build Parameters

BOARD=onecloud

BRANCH={edge,current,legacy}

BRANCH kernel version Boot Shutdown/Reboot eMMC HDMI VPU
edge xdarklight's v5.18-rc ✔️ ✔️ ✔️ ✔️ ✔️
current v5.14 ✔️ ✔️ ✔️ ❌ ❌
legacy v5.11 ✔️ ✔️ ✔️ ❌ ❌
<=v5.10 ✔️ ✔️ ❌ ❌ ❌
>=v5.15 Take a long time ❌ ✔️ ❌ ❌

BUILD_DESKTOP={no,yes}

See above. Only work with BRANCH=edge

Bootscript

Boot from USB (New, waiting for merging)

bootdev="usb 0"
rootdev="/dev/sda2"
usb start
fatload ${bootdev} 0x20800000 boot.scr && autoscr 0x20800000

Boot from eMMC (New, waiting for merging)

bootdev="mmc 1"
rootdev="/dev/mmcblk1p2"
fatload ${bootdev} 0x20800000 boot.scr && autoscr 0x20800000

Boot from USB (Old)

setenv bootargs "root=/dev/sda2 rootwait rw console=ttyAML0,115200n8 no_console_suspend consoleblank=0"

fatload usb 0 0x20800000 /uImage
fatload usb 0 0x22000000 /uInitrd
fatload usb 0 0x21800000 /dtb/meson8b-onecloud.dtb

fdt addr 21800000

bootm 0x20800000 0x22000000 0x21800000

Boot from eMMC (Old)

setenv bootargs "root=/dev/mmcblk1p2 rootwait rw console=ttyAML0,115200n8 no_console_suspend consoleblank=0"

fatload mmc 1 0x20800000 /uImage
fatload mmc 1 0x22000000 /uInitrd
fatload mmc 1 0x21800000 /dtb/meson8b-onecloud.dtb

fdt addr 21800000

bootm 0x20800000 0x22000000 0x21800000

Why not contribute to the official repository？

There's no way to detect which device we are booting from. So I can't write a common bootscript.

Although we can try to boot in a certain order, but this may make users confused.

For example, we run the bootscript in eMMC, but the first order is USB. So We boot the kernel in USB.

I willn't contribute to the official repository until I find a good solution.

GPIO

In the board, there is a missing 44-pins chip (WiFi module possibly) which has lots of pins connected to the SoC. They are ablt to be used as GPIO.

Please check the dts (added by patch/kernel/archive/meson-{5.10,5.18}/support-xunlei-onecloud.patch) for more details.

NOTE: These pins were found in V1.0 board. Those in V1.3 board was not confirmed yet.

Known bug

Compile error (Fixed, waiting for merging)

cache/toolchain/gcc-arm-8.3-2019.03-x86_64-arm-linux-gnueabihf/bin/../lib/gcc/arm-linux-gnueabihf/8.3.0/plugin/include/builtins.h:23:10: fatal error: mpc.h: No such file or directory
make[2]: *** [scripts/gcc-plugins/Makefile:47: scripts/gcc-plugins/arm_ssp_per_task_plugin.so] Error 1
make[1]: *** [scripts/Makefile.build:496: scripts/gcc-plugins] Error 2
make: *** [Makefile:1197: scripts] Error 2
[ error ] ERROR in function compile_kernel [ main.sh:588 -> main.sh:489 -> compilation.sh:507 -> general.sh:0 ]

Install libmpc-dev

apt install libmpc-dev

The USB closed to the HDMI doesn't work (Fixed, waiting for merging)

The mode of USB0 was set to otg due to my need for USB Gadget. Check the &usb0/dr_mode in the dts (added by patch/kernel/archive/meson-{5.10,5.18}/support-xunlei-onecloud.patch).

In early test, I notice that the USB Slave can be detected. So I contributed to the official repository directly. But it doesn't working now.

For V1.3 board, probably due to not connecting VBUS to SoC, the ACA check will fail. So the USB0 will be disabled.