ea9500_openwrt

OpenWrt support for the Linksys EA9500

This repository aims to support the Linksys EA9500 (linksys,panamera) using the swconfig driver and configuration framework.

Components

ea9500_support : Adds LED, switch, and dual-partition support for the Linksys EA9500

Building

Step 1

To build OpenWrt for the EA9500, you must first add this feed to your feeds.conf

src-git ea9500_openwrt https://github.com/hurrian/ea9500_openwrt.git

$ ./scripts/feeds update -a
$ ./scripts/feeds install -a

Step 2

The custom configuration overlay needs to be enabled by using the custom files feature of the OpenWrt buildroot. While in your buildroot directory (ex. ~/openwrt), run the following command:

~/openwrt $   ln -s feeds/ea9500_openwrt/files files

Step 3

You must then enable the Linksys EA9500 target in target/linux/bcm53xx/image/Makefile by uncommenting TARGET_DEVICES += linksys-ea9500.

define Device/linksys-ea9500
  DEVICE_VENDOR := Linksys
  DEVICE_MODEL := EA9500
  DEVICE_PACKAGES := $(BRCMFMAC_4366C0) $(USB3_PACKAGES)
  DEVICE_DTS := bcm47094-linksys-panamera
endef
TARGET_DEVICES += linksys-ea9500

Step 4

In make menuconfig, select Base System -> ea9500_support <*>.

Quirks

The EA9500's CPU ports are directly connected to a BCM53012 switch wired to LAN4,7,8 plus an external BCM53125 switch wired to LAN1,2,3,5,6. This means that you will only see the internal BCM53012 ports in LuCI's switch configuration.

For some reason, the latest Broadcom firmware from linux-firmware (10.10.122.x) is not properly supported by brcmfmac - using the newer version will render radio2 non-functional. This repository includes the latest known working version of BCM4366C0 firmware for EA9500 (10.10.69.69).

License

Files are licensed under the terms of GNU GPLv2 License; see LICENSE file for details.

Credits

Credit goes to Vivek Unune / npcomplete13 for figuring out the EA9500.

rabbit2190/ea9500_openwrt