Pinned Repositories
BIGTREETECH-TouchScreenFirmware
support TFT35 V1.0/V1.1/V1.2/V2.0/V3.0, TFT28, TFT24 V1.1, TFT43, TFT50, TFT70
Marlin
Marlin is an optimized firmware for RepRap 3D printers based on the Arduino platform. Many commercial 3D printers come with Marlin installed. Check with your vendor if you need source code for your specific machine.
BIGTREETECH-SKR-E3-DIP-V1.0
BIGTREETECH SKR-E3-DIP-V1.0 motherboard is launched by the 3D printing team of Shenzhen BIGTREE technology co., LTD. This board is specially tailored for Ender 3 printer, perfectly replacing the original Ender3 printer motherboard.
BIGTREETECH-TouchScreenFirmware
support TFT35 V1.0/V1.1/V1.2/V2.0/V3.0, TFT28, TFT24 V1.1, TFT43, TFT50, TFT70
BTT-TFT35-E3-V3.0
BIGTREETECH TFT35-E3 V3.0 is a medium size, dual-mode, ultra-clear 3D printing machine display launched by the 3D printing team of Shenzhen BIGTREE Technology CO., LTD., which can perfectly replace the original LCD screen of Ender3 printer.
ChanSort
DSO-150
DSO-Shell-open-source-version-
Source codes for DSO Shell (DSO150) from JYE Tech. They are not an exact copy of factory codes (e. g. product testing codes are not included) but have completely the same functions and performance of matching revision. The codes are built with support of the library file libdso150.a, which implements the core DSO functions and runs only on DSO Shell or equivalent boards. Source codes for library file libdso150.a are not included in this repository. This project was developed under CodeSourcery G++ Lite.
Marlin
Marlin is an optimized firmware for RepRap 3D printers based on the Arduino platform. | Many commercial 3D printers come with Marlin installed. Check with your vendor if you need source code for your specific machine.
PrusaSlicer
G-code generator for 3D printers (RepRap, Makerbot, Ultimaker etc.)
radek8's Repositories
radek8/ChanSort
radek8/Marlin
Marlin is an optimized firmware for RepRap 3D printers based on the Arduino platform. | Many commercial 3D printers come with Marlin installed. Check with your vendor if you need source code for your specific machine.
radek8/BIGTREETECH-SKR-E3-DIP-V1.0
BIGTREETECH SKR-E3-DIP-V1.0 motherboard is launched by the 3D printing team of Shenzhen BIGTREE technology co., LTD. This board is specially tailored for Ender 3 printer, perfectly replacing the original Ender3 printer motherboard.
radek8/BIGTREETECH-TouchScreenFirmware
support TFT35 V1.0/V1.1/V1.2/V2.0/V3.0, TFT28, TFT24 V1.1, TFT43, TFT50, TFT70
radek8/BTT-TFT35-E3-V3.0
BIGTREETECH TFT35-E3 V3.0 is a medium size, dual-mode, ultra-clear 3D printing machine display launched by the 3D printing team of Shenzhen BIGTREE Technology CO., LTD., which can perfectly replace the original LCD screen of Ender3 printer.
radek8/DSO-150
radek8/DSO-Shell-open-source-version-
Source codes for DSO Shell (DSO150) from JYE Tech. They are not an exact copy of factory codes (e. g. product testing codes are not included) but have completely the same functions and performance of matching revision. The codes are built with support of the library file libdso150.a, which implements the core DSO functions and runs only on DSO Shell or equivalent boards. Source codes for library file libdso150.a are not included in this repository. This project was developed under CodeSourcery G++ Lite.
radek8/PrusaSlicer
G-code generator for 3D printers (RepRap, Makerbot, Ultimaker etc.)