radxa-build/radxa-zero3

Issues

• 3W EMMC rsetup failed

  #31 opened a month ago by hh-kai
  3

• Enable USB serial console (CDC).

  #30 opened a month ago by SimonTechv
  2

• [Question]Upstreamed Zero 3W/E support in linux 6.11 and later.

  #29 opened a month ago by samveen
  4

• Can't connect to WiFi in headless mode

  #7 opened a year ago by distolma
  13

• Unable to ssh remotely unless I login to physical console first

  #23 opened 7 months ago by foxjony
  3

• Debian 12 OS image?

  #28 opened 2 months ago by Jibun-no-Kage
  2

• 3E overlay找不到DS3231

  #27 opened 3 months ago by hh-kai
  2

• ZERO 3E 打开USB摄像头 使用MJPEG数据 编码h264失败

  #25 opened 3 months ago by hh-kai
  20

• ZERO 3E 打开USB摄像头 使用MJPEG数据 编码h264失败

  #26 opened 3 months ago by hh-kai
  3

• Radxa Zero 3W high spi latency (IMPORTANT)

  #24 opened 5 months ago by ThoMint
  15

• Speed ​​test

  #21 opened 7 months ago by foxjony
  5

• Radxa Camera 8M don't work

  #15 opened 8 months ago by nerbivol
  30

• radxa-zero3_debian_bullseye_cli_b3.img doesn't boot on Zero 3W

  #4 opened a year ago by zehnm
  14

• unable to ssh remotely unless I login to physical console first

  #8 opened a year ago by rabee05
  13

• IS anyone working on THIS!!!!

  #22 opened 7 months ago by captclearleft
  5

• apt update

  #20 opened 7 months ago by foxjony
  1

• UART2_M0 Configuration Causes Radxa Zero 3 to Fail Boot

  #19 opened 8 months ago by nerbivol
  7

• Unable to use UART get nothig but garbled text in console using working USB to UART interface?

  #18 opened 8 months ago by Jibun-no-Kage
  7

• So Slow! So Incredibly slow....

  #11 opened a year ago by captclearleft
  9

• Is this abandoned?

  #17 opened 9 months ago by map588
  3

• unable to use mraa

  #16 opened 9 months ago by amin005
  1

• Is this repo alive?

  #14 opened 10 months ago by michelepagot
  1

• Where the code come from???

  #13 opened 10 months ago by michelepagot
  1

• Wiki link in this repo point to old deprecated wiki

  #12 opened 10 months ago by michelepagot
  1

• radxa camera 8M 219 doesn't work

  #10 opened a year ago by digitalshamansky
  1

• wifi not available in radxa-zero3_debian_bullseye_xfce_b3 image

  #3 opened a year ago by tester58126
  24

• Cannot switch to Panfork driver

  #9 opened a year ago by platima
  1

• radxa-zero3_debian_bullseye_cli_b3 stuck on boot

  #6 opened a year ago by yungseppel
  3

• cli img not booting

  #5 opened a year ago by wrossi
  3

• Unable to boot cli image

  #2 opened a year ago by tester58126
  2