*** IAW Scan 2 IAW Scan 2 is a succesor of the IAW ECU Scan application. It is designed to enable easy diagnostics of FIAT OBD-I Engine Control Units. Application works on any x86/x64 version of Microsoft Windows capable of running .NET 2.0 (namely from Windows 2000 to Windows 7) and uses an inexpensive and widely available ISO-KKL interface (requires additional ODB-2 to FIAT 3-pin adaptor cable). The interface can be either RS-232 or USB (FT232) based. It supports most of the FIAT cars which use the IAW-6F/8F/16F/18F/18FD Engine Control Units like Cinquecento 900/1100, Seicento 900/1100, Panda 1.0/1.1, Punto 55/60/75/85, Tipo/Tempra 1.6 and also Lancia (Delta/Dedra 1.8, Y 1.2) and Alfa-Romeo (145/146 1.3 BOXER). Since introduction of IAW-04K also some 2.0 engines are supported: FIAT Coupe S 2.0, Tipo 2000, Alfa Romeo 155 2.0 16V, Lancia Delta/Dedra 2.0 16V. CHANGE LOG Release 0.86 (03.05.2020) + Spanish translation thanks to Julio Ortiz. Release 0.85 (11.05.2015) + German translation thanks to Renè Bayer. Release 0.84 (25.03.2015) * Minor code improvements. + List of supported cars for each ECU in ECU selection screen. Release 0.83 (27.12.2014) + Bosnian/Croatian/Serbian version thanks to Edin Huseinagić. Release 0.82 (23.07.2014) * Corrected splash screen code. * Improved temperature decoding for IAW-04K. * Improved communication stability (previously some random errors colud occur for IAW-8F) Release 0.81 (12.12.2013) * Corrected crash after ECU stops responding in Active Diagnostic Mode. * Corrections in Polish language texts. - Removed Stepper Motor Test for IAW-16F as it was not funtional. Release 0.80 (12.09.2013) * Corrected Splash Screen code. * Corrected MAP pressure units in IAW-04K. * Corrected a bug in error decoding in IAW-04K. * Code cleanup. Release 0.79 (31.07.2013) + Portugese version thanks to Artur Soares. * Reorganized project structure. Release 0.78 (25.03.2013) * Corrected null exception in the FIAT-CODE and IAW-04K modules. Release 0.77 (13.03.2013) * Corrected connection cancelling. + Adjustments Tab. + IAW-1G7 Palio 1.0. Release 0.76 (17.01.2013) * Corrected Injection Time decoding (corrupted in previous release). Release 0.75 (14.01.2013) * Corrected a bug that caused first test in the list to clear codes instead of executing the actual test. * Minor polish language corrections. + Added FIAT CODE Immobiliser as a separate unit. + Added option to toggle fuel trim and idle stepper autocalibration. Release 0.74 (11.01.2013) * Corrected column labelling in CSV log file. * Corrected decoding of signed parameters. + Added graph scrolling. + Added Italian language. Release 0.73 (25.11.2012) + Chceck if COM port is available while openeing. * Improved timmers accuracy. * Fixed (hope this time for good) autodetction routine. Release 0.72 (06.08.2012) * Corrected TPS decoding routine in IAW-04K.P8 * Possible autodetection of IAW-04K (but early units do not respond on ISO and CODRIC requests) + Added version info to log file Release 0.71 (05.07.2012) * Slightly reduced polling speed in order to gain readouts stability. * Now 'Compatibility Mode' can work with a single K-Line interface (pins 1 & 3 shorted in the diagnostic socket) Release 0.70 (07.06.2012) * Fixed graph data overrun when single parameter selected, now graph is updated at fixed period of 100ms Release 0.69 (19.03.2012) + Trimmer & stepper autocalibration reset for IAW-x6F/x8F Release 0.68 (02.02.2012) + Error decoding for IAW-04K.P8 Release 0.67 (30.12.2011) * Minor polish language corrections * Changed datatype of some (adaptation) parameters + Air & water temperature decoding for IAW-04K.P8 Release 0.66 (31.10.2011) + Dutch language added (thanks to Gerrelt) + Experimental support for early IAW-8F used in Alfa 33 (thanks to Gerrelt) Release 0.65 * Connection lost state detection fixed * Diagnostic mode initialisation fixed + Partial support for IAW-04K.P8 (all but error reading) Release 0.64 * Serial port buffer is cleaned before each query * Errors are queried only when errors panel is visible and parameters are queried only when parameters or graph panel is visible (greatly improves data refresh rate) Release 0.63 (02.09.2011) * Corrected a serious bug in IAW-18F/18FD error decoding routines Release 0.62 (29.08.2011) * Corrected ISO table for car model identification + Added some missing strings to Polish translation + Added help panel Release 0.6 (28.08.2011) - Removed DEMO-Mode + Added Simulation-Mode (for all ECUs, initialized by Ctrl+Connect / Ctrl+F10) + Addad option to re-initialize connection after communication lost * Resolved issue with splash screen causing main form focus lost * Improved ECU autodetection routine Release 0.5 (27.08.2011) + Communication Error Handling * Corrected a bug causing parameter refersh rate was reduced to 1/3 * Compatible mode added (actualy it should be no-delay mode but this became the default mode while compatible mode adds 4ms wait between receiving response and sending next request). Release 0.4 (25.08.2011) * Minor UI improvements + Connection initialisation cancelling Release 0.3 (24.08.2011) + Dynamic log recording to CSV + Live Data Graph + Lambda Voltage on (some) IAW-18FD Release 0.2 (23.08.2011) + LOG is now functional Release 0.1 (22.08.2011) * First public release